ORA SMX11 12 V underwater light - blue
In stock
Technical specifications
Technical specifications
| Type de produit | Projecteur sous-marin |
| Installation type | Montage en surface |
| Operating voltage range | 10.5-14.5 |
| Typical power consumption | 12 W |
| Flux lumineux | 1100.0 |
| Angle du faisceau | 60.0 |
| Light color | Bleu |
| Diamètre extérieur | 85.0 |
| Housing material | Polymère de qualité marine |
| Couleur / finition | Blanc |
| IP rating | IP68 |
| Durée de vie prévue | 50000.0 |
| Front Protrusion Depth Mm | 13 |
| Installation location | Les deux |
| Integrated Driver | Oui |
| Led Count | 6 |
| Led Power Per Unit W | 3 |
| Light Technology | HICOB Array |
| Light Type | Monochrome |
| Power Consumption Max Current A | 1 |
| Raw Lumens | 2475 |
| Thermal Management Feature | Active Thermal Rollback (ATRB) |
Detailed description
Detailed description
Designed for small boats, the Garmin ORA SMX11 LED underwater light provides a compact and powerful lighting solution. This model, available in blue, is specifically designed for surface mounting, making installation on the hull or transom of vessels straightforward.
Performance and Technology
The Garmin ORA SMX11 integrates six high-power 3W LEDs each, using HICOB Array technology for efficient light output. It delivers a raw luminosity of 2,475 lumens, with a verified output of 1,100 lumens, concentrated in a 60-degree beam. Its typical LED lifespan exceeds 50,000 hours of use. Powered by 12V DC (range 10.5 to 14.5 V DC), it draws a maximum current of 1A thanks to its integrated internal driver. The SMX11 series stands out with its ultra-thin profile of approximately 13 mm front protrusion and a face diameter of 85 mm, incorporating Active Thermal Rollback (ATRB) for optimal thermal management.
Marine Design and Installation
Constructed with a marine-grade polymer housing, the SMX11 is designed to withstand demanding marine environments and carries an IP68 rating for water and dust resistance. Installation is simplified, requiring only a small cable hole and three mounting screws. It can be installed above or below the waterline, though Lumishore recommends a depth of 100 to 300 mm below the waterline for optimal underwater illumination. Each light must be protected by a 2A fuse. Control is via a simple on/off switch.
Expert opinion
Expert opinion
Pol CONIN
Digital Manager
« Garmin ORA SMX11 underwater light: technical analysis and integration »
Your payment information and data are processed securely.

