M6-10IB-C-GwGw-4 Marine Subwoofer

The JL Audio M6-10IB-C-GwGw-4 is a 10-inch (250 mm) marine subwoofer designed to deliver powerful and precise bass in marine environments. It is part of JL Audio's M6 series and is optimized for Infinite Baffle installations (mounting without a dedicated enclosure).

This subwoofer has a nominal diameter of 10 inches, which corresponds to approximately 250 mm. Its total outer diameter is 10.75 inches (273 mm).

Yes, this product is specifically designed for marine use and is water-resistant. However, it must not be submerged or exposed to high-pressure water jets.

This subwoofer is supplied with a Classic Grille in Gloss White (GwGw), as indicated by the model name.

The recommended RMS power for this subwoofer is 250 watts. It is important to pair it with an amplifier capable of delivering this power consistently for optimal performance.

The nominal impedance of this subwoofer is 4 ohms. This information is crucial when selecting a compatible amplifier.

The "Infinite Baffle" (IB) design means this subwoofer is built to be mounted directly in a large cavity on the boat (such as a bulkhead or transom) without requiring a dedicated sealed or vented enclosure. The boat's structure then acts as the enclosure, isolating the rear sound wave from the front sound wave to produce deep bass.

JL Audio’s M6 series subwoofers are known for their robust design and exceptional audio performance in marine environments. They are built with corrosion- and UV-resistant materials, delivering superior sound quality and increased durability for an optimal marine audio experience.

Before any installation, it is important to turn off the audio system and disconnect the battery. Before cutting or drilling, always check for potential obstacles behind mounting surfaces to avoid damaging the boat or its components.

Yes, it is not recommended to install this product in an engine compartment or any other area subject to extreme heat, as this could damage the subwoofer and void the warranty.

To clean your subwoofer, use mild soap and rinse it only with fresh water. Avoid harsh chemicals or high-pressure water jets, which could damage marine components.

No, this subwoofer is designed as an "Infinite Baffle" (IB), meaning it is optimized for installation without a dedicated enclosure. It uses the air volume of the cavity in which it is mounted (e.g., the boat’s hull) as its acoustic enclosure.

Yes, it is crucial to mount this product securely to prevent any damage or injury in rough or extreme sailing conditions. Proper mounting ensures the subwoofer's safety and longevity.

Given its 4-ohm impedance and 250-watt RMS power rating, it is recommended to use a marine amplifier stable under 4 ohms, capable of delivering approximately 250 watts RMS for a single subwoofer, or an appropriate combined power output if using multiple subwoofers.

Yes, this subwoofer is designed to integrate with most existing marine audio systems. It is important to verify impedance compatibility (4 ohms) and power matching with your amplifier and main unit to ensure optimal performance.

Exposure to water and damage to the rear of the product will void the warranty. It is therefore essential to ensure that the installation properly protects the rear of the subwoofer from water ingress.