JL Audio MMR-25W Marine Audio Remote

The JL Audio MMR-25W is a wireless marine audio remote control. It is designed to provide remote control of compatible JL Audio MediaMaster® source units using Bluetooth technology for the connection.

This remote control manages essential audio functions, including:

Turn the device on and off.Select available audio sources.Mute/unmute or pause/resume playback.Increase or decrease volume.Select zones for volume adjustment.Skip to next/previous tracks or favorites.Perform quick searches (fast forward/rewind).

The JL Audio MMR-25W remote control uses a CR2032 button cell (3 volts).

To turn on the remote, briefly press the power button. To turn it off, press and hold the same button.

To scroll through available audio sources, briefly press the dedicated source selection button.

To increase the volume, press the '+' button briefly. To increase continuously, press and hold the '+' button. To decrease the volume, press the '-' button briefly. To decrease continuously, press and hold the '-' button.

Yes, a brief press of the appropriate button allows you to mute or unmute the sound. The same action also allows you to pause or resume audio playback.

To select the next track or next favorite, press the navigation button briefly. For fast-forward, press and hold the same button. To select the previous track or previous favorite, press the navigation button briefly. For rewind, press and hold the button.

Yes, this product contains a button cell battery that poses an ingestion hazard. If swallowed, it may cause severe or fatal injuries. Keep new and used batteries out of children's reach at all times. If you suspect a battery has been swallowed or inserted into any part of the body, seek immediate medical attention.

Here are the important instructions:

Replace batteries only with suitable replacement batteries: CR2032 (3 V).
Non-rechargeable batteries must not be recharged.
Do not force discharge or recharge batteries, do not disassemble them, expose them to heat above 60 °C (140 °F), or incinerate them, as this could cause injuries due to leakage, spillage, or explosion.
Ensure batteries are installed correctly, respecting polarity (+ and –).
Do not mix old and new batteries, or different brands or types of batteries (alkaline, zinc-carbon, or rechargeable).
Remove and recycle or dispose of batteries from unused equipment immediately after prolonged periods of non-use, in accordance with local regulations.

The MMR-25W remote uses Bluetooth technology to establish its wireless connection with the compatible source unit.

No, the JL Audio MMR-25W remote control uses a non-rechargeable CR2032 button cell battery. Attempting to recharge it is strongly discouraged.

If the remote control is not used for an extended period, it is recommended to remove the battery and recycle it or dispose of it immediately in accordance with local regulations. This helps prevent leakage or corrosion risks.

Improper handling of the battery, such as forced discharge, recharging, disassembly, heating above 60 °C (140 °F), or incineration, can result in serious injury. These injuries may be caused by gas release, leakage, or explosion, leading to chemical burns.

The MMR-25W remote control is specifically designed for use with compatible JL Audio MediaMaster® source units. It is important to verify the compatibility of your specific MediaMaster® unit.

Yes, the technical documentation states that the functionality of the MMR-25W remote control commands may vary depending on the MediaMaster® host source unit to which it is connected.

To put the remote control into pairing mode, press and hold the power button for 5 seconds.

To select the next zone for which you want to adjust the volume, press the dedicated zone selection button briefly.

Yes, you can lock or unlock the current audio zone by pressing the zone-select button for 5 seconds.

When installing the CR2032 battery, ensure it is inserted correctly by respecting the polarity (+ and –) indicated. Incorrect installation may prevent the remote control from working or cause damage.