Lewmar Foot Switch – Up

This Lewmar foot switch is designed to activate the winch's up function. It allows you to retrieve the anchor or chain by simply pressing down with your foot, providing a practical and secure deck-mounted control on your boat.

This specific Lewmar foot switch is dedicated solely to the up function. This means it can only be used to raise your anchor or chain. For the down function, a separate switch or control would be required.

This Lewmar foot switch is dark gray, allowing it to blend discreetly on most boat decks.

Yes, like all Lewmar equipment intended for marine use, this foot switch is designed to withstand harsh marine conditions, including exposure to salt water, UV rays, and weather.

Lewmar foot switches typically feature a textured surface or a design that minimizes the risk of slipping, ensuring safe use even when the deck is wet.

This foot switch operates on a momentary contact principle. This means the circuit is activated only while you maintain pressure on the button with your foot. As soon as pressure is released, the contact opens.

No, this Lewmar foot switch is not illuminated or backlit. It is a simple control switch without built-in lighting indication.

Lewmar foot switches are typically made from robust UV-resistant polymers, designed to withstand harsh marine environments and ensure long service life.

This Lewmar foot switch is compatible with 12 V DC and 24 V DC electrical systems, making it versatile for a wide range of marine installations.

Although it is a Lewmar brand product, this foot switch can be compatible with most windlass models from other brands, provided the electrical system matches (12/24 V DC) and an appropriate relay is used to handle the windlass motor current.

Yes, a relay is required for using this foot switch. The switch handles a low control current (5 A), while the relay is necessary to safely switch the high current of the windlass motor.

This foot switch is designed to handle a maximum contact current of 5 A. This is the control current that activates the relay, not the direct current powering the windlass motor.

No, this foot switch is specifically designed for the windlass up function. To control the windlass down function, you will need a separate switch or dedicated control.

Yes, this foot switch is fully compatible with windlass systems operating at 24 V DC, in addition to being compatible with 12 V DC systems.

Yes, this foot switch can be integrated into most existing windlass control systems, provided that the voltage requirements (12/24 V DC) and the need for a relay are met. It acts as an additional switch for the up function.

This foot switch is typically designed for flush mounting on the deck. This requires drilling a hole in the deck so the switch body fits inside, leaving only the top of the button exposed for activation.

Yes, installing this foot-mounted switch requires drilling a hole in your boat’s deck for flush mounting and secure attachment. It is essential to follow the manufacturer’s instructions regarding hole dimensions.

Use of appropriately sized wiring for marine environments, resistant to corrosion and vibration, is recommended. The exact cross-section depends on cable length and system voltage but must be sufficient for the 5 A control current.

The ideal location to install this foot switch is typically on the foredeck, near the windlass and anchor, in an area that is easily accessible with the foot but sheltered from frequent foot traffic to prevent accidental activations. Ensure there is sufficient space under the deck for wiring.

Generally, Lewmar products are supplied with a detailed wiring diagram and installation instructions to facilitate assembly. It is always recommended to consult these documents before proceeding with the installation.