EOS TIX404 Set, 2 Lights, Hub, LUX Command Center, Display Viewer - Garmin

Kit EOS TIX404, 2 projecteurs, concentrateur, centre de commande LUX et écran - visuel officiel Garmin 2

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 7%

Garmin

010-04531-00

EOS TIX404 kit, 2 underwater lights, hub, LUX control unit and display

The Garmin EOS TIX404 kit is a complete underwater lighting system, integrating two TIX404 RGBW thru-hull lights (7500 lumens each), a hub, an EOS-LUX control center, and an EOS-LUX-SUPRA display. Designed for MFD integration and Wi-Fi control, this Lumishore solution provides dynamic illumination and advanced features for vessels up to 25 meters. The kit includes 2 TIX404 lights, an i-Connect hub (60-0321), an EOS-LUX control center (60-0366), and an EOS-LUX-SUPRA display (60-0369).

Configuration: With screen

No display With screen

Retail priceBenefit from the professional rate

5.548,32€

5.548,32€ ~~5.969,99€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Type de produit	Underwater lighting kit
Installation type	Through-hull
Operating voltage range	10.5-31 V DC
Typical power consumption	148.8
Flux lumineux	7500.0
Angle du faisceau	110.0
Température de couleur	6500.0
Light color	RGB White (Full Color Change RGBW)
Diamètre extérieur	88.0
Housing material	Marine bronze with borosilicate glass
Couleur / finition	Marine bronze
IP rating	IP68 (floodlights and display) / IP67 (control unit)
Variateur compatible	Oui
Durée de vie prévue	50000.0
Amperage	5.8 A (12V) / 2.9 A (24V)
Automatic Light Discovery Setup	Yes
Beam coverage angle	110°
Bonding Required	true
Type de contrôle	Touchscreen, rotary knob, MFD control, WiFi
Diamètre de découpe d'installation	57.0
Product dimensions	Diameter 88 mm, height 8 mm, shaft length 136 mm
Dmx Extension Cable Part Numbers	60-0403, 60-0404, 60-0405
Dmx Terminator Part Number	24-0087
Hub Installation Environment	Dry and well-ventilated
Hub Unused Port Caps Required	Yes
Hull Isolation Available	true
Led Configuration	White–12×10W / Green–12×3W / Blue–12×3W / Red–16×3W
Durée de vie LED	50000
Light Extension Cable Max Length	6 (total)
Light Extension Cable Part Number	60-0407
Light source type	High-power LED
MFD compatibility	Yes (Garmin, Raymarine, Navico, Furuno)
Mounting type	Through-hull transducer
Package contents	2 TIX404 floodlights, 1 i-Connect hub, 1 EOS-LUX control center, 1 EOS-LUX-SUPRA display
Power Connection Waterproofing Required	Yes
Product range	EOS
Switch Terminator Part Number	39-0091
Wired network	DMX512,RDMX,Lumi-Link
Wireless connectivity	WiFi

Detailed description

Designed for high-intensity, full-spectrum underwater illumination, the Lumishore EOS TIX404 lighting kit provides a complete lighting system for vessels. This pack includes two TIX404 through-hull underwater lights, an i-Connect hub, an EOS-LUX control unit, and an EOS-LUX-SUPRA display, enabling advanced control and color customization. The system is suitable for GRP and wooden hulls, for vessels ranging from sports boats to superyachts, accommodating a wide range of boats.

TIX404 Underwater Lights: Illumination and Design

Each TIX404 underwater light is an interchangeable through-hull model, delivering up to 16,875 raw lumens and 7,500 lumens in white (at 6,500K). Lighting is provided by an RGBW LED array, including 16x 3W red LEDs, 12x 3W green LEDs, 12x 3W blue LEDs, and 12x 10W white LEDs, ensuring a typical lifespan of over 50,000 hours. The robust construction in marine-grade bronze with a borosilicate glass lens ensures resistance to marine environments, with an IP68 rating. These lights feature a multi-channel driver, surge protection (3,000V), automatic thermal protection (ATRB), and intelligent power management. Installation is recommended between 150 and 250 mm below the waterline and spaced 0.8 to 2 meters apart for optimal effect. The interchangeable design allows maintenance from inside the hull without requiring the vessel to be taken out of the water, distinguishing it from fixed through-hull models.

Advanced Control and System Integration

The i-Connect hub is essential for unlocking full control of up to four Lumishore EOS color-changing underwater lights. It is expandable, allowing up to four hubs to be connected on the same vessel. The EOS-LUX control unit centralizes the management of underwater and deck lighting systems. It offers extensive compatibility with multifunction displays (MFD) from brands such as Garmin (OneHelm), Raymarine (Axiom), Navico (Simrad, B&G, Lowrance), and Furuno (Navnet TZ Touch 3), as well as Wi-Fi control via smartphone or tablet. The EOS-LUX-SUPRA display is a dedicated 3.5-inch dashboard-mounted controller, combining a touchscreen and a rotary knob. It enables intuitive color selection, intensity adjustment, and activation of dynamic modes such as strobe, sweep, color cycling, and the "Sound-to-Light" function. This kit provides a sophisticated lighting solution compared to monochromatic or limited-control systems, positioning the TIX404 as a high-performance option for customized and integrated lighting experiences.

Documentation

Type	Nom
	Installation manual - Lumishore EOS TIX404 system installation and operating guide (EN)
	Technical Reference - Datasheet for EOS TIX404 Underwater LED Light (EN)
	Technical Reference - EOS-LUX Command Center Datasheet (EN)
	Technical Reference - Datasheet for EOS-LUX-SUPRA Display (EN)
	EOS-LUX SUPRA Display 2204-i Installation & Operating Guide
	User Manual - EOS-LUX Command Center Setup and User Guide (EN)
	Installation Guide - EOS-LUX Lumi-Link Command Center (EN)

Expert opinion

Pol CONIN

Digital Manager

« Lumishore TIX404 underwater lighting: performance and simplified maintenance »

The Lumishore EOS TIX404 kit is a complete underwater lighting solution designed for vessels requiring careful integration and extensive control flexibility. Its practical value is particularly relevant for yacht and superyacht owners across a wide range of vessels, seeking to enhance both the aesthetics and functionality of their vessel with high-intensity, color-changing lighting. The system's standout feature is its through-hull TIX404 interchangeable spotlights, allowing maintenance or replacement from inside the vessel without hauling it out of the water. This is a significant advantage over traditional through-hull systems.

In terms of installation, the through-hull nature of the spotlights requires hull penetration, typically performed during a haul-out or dry docking. It is essential to respect the mounting distances below the waterline (150–250 mm) and between lights (0.8–2 m) to ensure uniform illumination and optimal "halo effect." Connecting to the vessel's equipotential bonding system is critical for galvanic protection and warranty validity. The i-Connect hub and EOS-LUX control center must be installed in a dry, ventilated location, with careful routing of DMX and power cables. The control center's extensive compatibility with Garmin, Raymarine, Navico, and Furuno MFDs simplifies integration into existing navigation bridges, providing a unified control interface. The EOS-LUX-SUPRA display adds redundancy and improved control ergonomics, particularly for quick access to lighting functions.

This kit differentiates itself from more basic lighting solutions through its integrated approach, intelligent power management, and the richness of its lighting modes, including audio synchronization. While the initial investment is higher, the durability of the components and the ease of TIX404 maintenance provide long-term compensation. However, it is important to note that this system is not designed for small craft where through-hull installation would be disproportionate or for temporary use. Its installation complexity requires technical expertise to ensure flawless watertight integrity and galvanic protection.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

EOS TIX404 kit, 2 underwater lights, hub, LUX control unit and display

5.548,32€

5.548,32€ ~~5.969,99€~~

Frequently Asked Questions

Need help? Contact us

What exactly is included in the Lumishore EOS TIX404 kit?

The Lumishore EOS TIX404 kit is a complete underwater lighting system. It includes two TIX404 through-hull lights, an i-Connect concentrator, an EOS-LUX control unit, and an EOS-LUX-SUPRA display.

What type of lighting do the TIX404 spotlights produce?

The TIX404 spotlights feature an RGBW LED array, providing full-spectrum lighting with color-changing options. They can produce 7,500 lumens of white light (at 6500K) and up to 16,875 raw lumens.

What is the typical lifespan of the LEDs in TIX404 floodlights?

The LEDs in TIX404 floodlights have a typical lifespan of over 50,000 hours, ensuring long-lasting illumination for your vessel.

On which hull types can TIX404 spotlights be installed?

TIX404 spotlights are designed for installation on GRP (glass-reinforced plastic or fiberglass) and wooden hulls. For metal or carbon fiber hulls, an isolation sleeve kit is required. In this case, bonding is not necessary.

At what depth below the waterline should the floodlights be installed?

For optimal performance, the TIX404 floodlights must be installed between 150 and 250 mm (6 to 10 inches) below the boat's minimum waterline.

What is the recommended distance between each floodlight for optimal illumination?

To achieve the best results and uniform illumination, install the TIX404 floodlights at a distance of 0.8 to 2 meters (2.5 to 6.5 feet) apart.

What materials are used to manufacture the TIX404 floodlights?

The TIX404 floodlights are built with a robust marine-grade bronze body and a borosilicate glass lens, ensuring high resistance to marine environments and increased durability.

What is the required power supply voltage range for the system?

The Lumishore EOS TIX404 lighting system operates on a power supply voltage range of 10.5 to 31 V DC.

Can the system be controlled via a multifunction display (MFD)?

Yes, the system is compatible with MFD integration via the EOS-LUX control hub. It supports certified MFD screens from brands such as Garmin (OneHelm), Raymarine (Axiom), Navico (Simrad, B&G, Lowrance) and Furuno (Navnet TZ Touch 3 series).

What is the beam angle of the TIX404 lights?

The TIX404 lights provide a 110° beam angle, ensuring wide underwater illumination coverage.

What is the required hole diameter for installing the spotlights?

The required hole diameter for installing the TIX404 spotlights is 57 mm (2-1/4 inches).

What protections are built into the TIX404 spotlights?

The TIX404 spotlights include a multi-channel driver, surge protection (3,000V), automatic thermal protection (ATRB), and intelligent power management to ensure proper operation and durability.

Is it possible to control the system via Wi-Fi?

Yes, the system can be controlled via Wi-Fi from a smartphone or connected device, either through the MFD's Wi-Fi or a local Wi-Fi network.

Is bonding necessary for Lumishore lights?

Yes, Lumishore lights must be connected to the vessel’s DC bonding system to provide protection against electrolytic/galvanic corrosion, unless installed in a metal hull with an isolation sleeve kit.

What is the water and dust protection rating of the components?

The TIX404 spotlights and the EOS-LUX-SUPRA display have an IP68 protection rating, while the EOS-LUX control unit has an IP67 rating.

Is the EOS-LUX control center compatible with other Lumishore lighting systems?

Yes, the EOS-LUX control center is compatible with all SMX, THX, and TIX EOS underwater lighting systems, as well as all Lumishore LUX above-water lighting systems.

What is the warranty duration for this kit?

The Lumishore EOS TIX404 kit, including the lights, control unit, and display, is covered by a 3-year warranty.

What are the main control functions offered by the system?

The system offers advanced functions such as configurable zone control, customizable lighting scenes, full-spectrum color cycling, predefined colors, fixed and random strobe modes, color sweep, customizable favorites, and the 'Sound-to-Light' feature.