Rallonge de tige Raymarine D008 152 mm pour pilote de barre franche

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 13%

Raymarine

D008

152 mm Extension

This Raymarine 152 mm extension is designed for integrating marine electronic systems, allowing precise adjustment of cable lengths in specific installations. It simplifies wiring without unnecessary excess length. The product includes the extension only.

Retail priceBenefit from the professional rate

52,04€

52,04€ ~~60,00€~~

Tax included. Shipping calculated at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	Direct connection
Material	PVC plastic
Color	Black
Compatible models	Raymarine Equipment
Product dimensions	152 mm
Weight	0.1
IP rating	IPX6
Installation type	Direct connection
Kit contents	A 152 mm extension cable
Product type	Cable extension

Detailed description

The Raymarine D008 is a 152 mm (6") pushrod extension for Raymarine tiller drive autopilot actuators.

Pushrod extension for tiller drive

This part extends the actuator pushrod to achieve the correct distance between the mounting bushing and the tiller pin. In Raymarine document 87279-3-EN, it corresponds to dimension C of 775 mm.

Mounting compatibility

This extension is used in Raymarine tiller drive autopilot installations (ST1000/ST2000, ST1000+/ST2000+, and Evolution Tiller Drive) depending on cockpit configuration and the dimensions specified in the manual.

Skysat advice

Before ordering, measure the actual distance between the fixed point of the actuator and the attachment point on the tiller. If the required adjustment is vertical, consider supports/bends D009, D010, D011, D159, or D160 instead of a pushrod extension.

Documentation

Type	Nom
	EN - Raymarine Tillerpilot Installation Manual - Raymarine Extension Rod 152 mm

Expert opinion

Pol CONIN

Digital Manager

« 152 mm to adjust the cylinder length »

The D008 must not be selected as a generic extension. It is used to correct the longitudinal dimension of the tillerpilot installation. If this measurement is incorrect, the ram may be under stress or lack travel. The correct method is to measure dimension C as indicated in the Raymarine manual, then select the appropriate length from the D003 to D008 range.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

152 mm Extension

52,04€

52,04€ ~~60,00€~~

Frequently Asked Questions

Need help? Contact us

What is this Raymarine extension used for?

The D008 extends the cylinder rod of a Raymarine tillerpilot by 152 mm. It ensures the correct distance between the cylinder’s fixed point and the tiller pin.

In which case should this length be chosen?

This length is selected when the measurement on the boat matches the value indicated in the Raymarine mounting table. The goal is to keep the cylinder within its useful stroke.

How much length does this part add?

It adds 152 mm, or about 6". In the Raymarine chart, it corresponds to a C dimension of 775 mm.

Which autopilots is it compatible with?

This applies to installations of Raymarine tiller pilot systems, including ST1000/ST2000, ST1000+/ST2000+, and Evolution Tiller Drive depending on configuration.

How to choose between D003, D004, D005, D006, D007 and D008?

You must measure dimension C of the installation in the Raymarine manual. Each part number adds a different length to the cylinder rod.

Do you also need a tiller pilot mount or pedestal?

It depends on the cockpit geometry. The extension corrects the longitudinal distance; the brackets/elbows mainly adjust the tiller height; the pedestals adjust the fixed point on the cockpit side.

Can this extension be cut or modified?

No. The part is designed for a specific length. Modifying it may cause misalignment or weaken the autopilot's mounting.

What to check before ordering?

Measure the mounting dimensions, identify the installed autopilot, and compare them with the Raymarine documentation. If in doubt, send the dimensions or a photo of the installation to Skysat.