Piedestal Raymarine D028 64 mm pour pilote de barre franche

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 20%

Raymarine

D028

64 mm pedestal

The Raymarine 64 mm pedestal (reference D028) is a mounting accessory designed for securing compatible marine electronic equipment, providing a stable and ergonomic base. It is intended for integrating specific instruments requiring this support size.

This pedestal is supplied alone, without additional mounting accessories or hardware.

Retail priceBenefit from the professional rate

96,13€

96,13€ ~~120,00€~~

Tax included. Shipping calculated at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	Surface mount
Compatible models	Raymarine devices with 64 mm base
Product dimensions	Base/mount diameter: 64 mm
Finish	Corrosion-resistant finish
Installation type	Screw-mounted
Display capacity	1
Product type	Mounting bracket

Detailed description

The Raymarine D028 is a 64 mm (2.5") pedestal socket for mounting a Raymarine tiller drive autopilot.

Socket pedestal for tiller drive

This part raises the actuator’s mounting socket when the attachment point must be on the cockpit surface. In Raymarine’s notice 87279-3-EN, it corresponds to a dimension G of 102 mm.

Actuator attachment point

The pedestal positions the actuator’s socket at the height specified by Raymarine. The mounting surface must remain rigid to withstand the forces transmitted by the autopilot.

Skysat advice

Check the attachment point height and the rigidity of the mounting surface before drilling. Depending on cockpit geometry, a tiller elbow or extension rod may also be required.

Documentation

Type	Nom
	EN - Raymarine tiller pilot installation manual - Raymarine 64 mm socket pedestal

Expert opinion

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

64 mm pedestal

96,13€

96,13€ ~~120,00€~~

Frequently Asked Questions

Need help? Contact us

What is this Raymarine pedestal used for?

The D028 is a 64 mm pedestal socket for the fixed point of a Raymarine tillerpilot cylinder.

When to choose a pedestal instead of a direct mount?

A pedestal is required when the cockpit surface is too low relative to the actuator axis. It allows positioning the fixed point at the height specified by Raymarine.

Which Raymarine part number corresponds to this reference?

In the Raymarine manual, D028 corresponds to a G dimension of 102 mm and a pedestal length of approximately 64 mm (2.5").

When should a socket pedestal be used?

Use this when the cylinder’s fixed point must be raised from a cockpit surface to match the autopilot’s geometry.

What is the difference compared to a tiller support/elbow?

The pedestal acts as the fixed point of the cylinder, on the cockpit structure. The elbow support acts on the tiller side to compensate for the tiller height.