Piedestal Raymarine D029 76 mm pour pilote de barre franche

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Raymarine

D029

76 mm pedestal

The Raymarine 76 mm pedestal (reference D029) is a mounting accessory designed to provide stable fixation for the brand’s marine electronic equipment. It offers a support base compatible with Raymarine standards, essential for secure installation. This product is delivered without additional accessories.

Retail priceBenefit from the professional rate

107,63€

107,63€ ~~120,00€~~

Tax included. Shipping calculated at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	Screw-mounted
Material	Metal
Color	Black
Compatible models	Raymarine instruments and displays compatible with a 76 mm mount
Product dimensions	Diameter: 76 mm
Finish	Painted black metal
Installation type	Screw mounting
Display capacity	Single
Kit contents	1x pedestal, mounting hardware
Product type	Mount / Pedestal

Detailed description

The Raymarine D029 is a 76 mm (3") socket pedestal for the fixed point of a Raymarine tiller drive autopilot.

Socket pedestal for tiller drive

This part raises the mounting socket of the cylinder when the anchor point must be taken on a cockpit surface. In the Raymarine 87279-3-EN manual, it corresponds to a dimension G of 114 mm.

Fixed point of the cylinder

The pedestal allows positioning the cylinder socket at the height specified by Raymarine. The mounting surface must remain rigid to withstand the forces transmitted by the autopilot.

Skysat advice

Check the height of the fixed point and the rigidity of the mounting surface before drilling. Depending on the cockpit geometry, a tiller elbow or a tiller extension may also be required.

Documentation

Type	Nom
	EN - Installation manual for Raymarine tillerpilot - Raymarine socket

Expert opinion

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

76 mm pedestal

107,63€

107,63€ ~~120,00€~~

Frequently Asked Questions

Need help? Contact us

What is this Raymarine pedestal used for?

The D029 is a 76 mm pedestal socket for the fixed point of a Raymarine tillerpilot cylinder.

When to choose a pedestal instead of a direct mount?

A pedestal is required when the cockpit surface is too low relative to the cylinder axis. It allows positioning the fixed point at the height specified by Raymarine.

Which Raymarine part number corresponds to this reference?

In the Raymarine manual, D029 corresponds to a G dimension of 114 mm and a pedestal length of approximately 76 mm (3").

When should a pedestal socket be used?

Use this when the cylinder's fixed point must be raised from a cockpit surface to match the autopilot's geometry.

What is the difference with a tiller extension or tiller elbow?

The pedestal acts as the fixed point of the ram on the cockpit structure. The elbow support acts on the tiller side to compensate for the tiller height.

Which autopilots is it compatible with?

It is used with Raymarine ST1000/ST2000 and Evolution Tiller Drive autopilots when mounting dimensions require it.

Does the mounting surface need reinforcement?

Yes, it must be rigid and strong enough to withstand the actuator’s loads. If in doubt, reinforce the mounting area.

What to check before ordering?

Measure the fixed point height and compare it to the Raymarine chart. Also check whether a ram extension or tiller support is required as an addition.