Cable adaptateur Raymarine A80559 sonde CPT-S/DVS vers Element HV

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 7%

Raymarine

A80559

CPT-S/DVS (9-pin) to Element HV (15-pin) sonar transducer adapter cable

The Raymarine A80559 adapter cable connects a CPT-S or CPT-DVS transducer (9-pin) to Element HV multifunction displays (15-pin), ensuring compatibility and reuse of your existing transducers. It provides a cost-effective solution for upgrading navigation systems. The product includes only the adapter cable.

Retail priceBenefit from the professional rate

99,65€

99,65€ ~~108,00€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	9-pin (CPT-S/DVS probe) / 15-pin (Element HV)
Cable type	Adapter cable
Compatible network	CHIRP sonar
Wired network	Raymarine proprietary sonar
Operating voltage	12V DC
Operating temperature	-10 to +50°C
Storage temperature	-20 to +70°C
IP rating	IPX7
Certifications	CE
Product type	Adapter cable
Compatible models	Raymarine CPT-S/DVS transducers (9-pin); Raymarine Element HV multifunction displays (15-pin)

Detailed description

The Raymarine A80559 adapter cable is designed to ensure compatibility between traditional CHIRP transducers CPT-S/DVS (9-pin connection) and the Element HV series multifunction displays (15-pin connection). This technical solution allows users of the brand to reuse their existing transducers when upgrading their navigation system, thereby optimizing hardware investment.

Connectivity and Raymarine system integration

The Raymarine Element HV series, known for its HyperVision sonar capabilities, uses specific 15-pin transducer connectors. Meanwhile, CPT-S and CPT-DVS transducers, often paired with older Dragonfly MFDs or other Raymarine MFDs, use a 9-pin connector. The A80559 cable establishes an electrical and data link between these two standards, enabling Element HV displays to interpret sonar signals from CPT-S/DVS transducers. CPT-S transducers, such as through-hull models in plastic or bronze (E70339, A80446, E70340, A80447, E70341, A80448, A80545), are Raymarine transducers recognized for their robustness and marine reliability.

Technical positioning and user advantage

This Raymarine A80559 adapter cable serves as a strategic integration component. It prevents the systematic replacement of a functional CPT-S/DVS transducer when acquiring an Element HV display, thereby reducing costs and installation complexity (drilling new hull holes or installing new transom brackets). While Element HV displays are optimized for HyperVision transducers (not included), using a CPT-S/DVS transducer via this cable provides reliable traditional CHIRP sonar capability. This approach differs from a full Element HV + HyperVision transducer solution, offering a more gradual and economical upgrade path, particularly suitable for recreational boaters looking to retain part of their existing equipment while benefiting from advances in new display platforms.

Documentation

Type	Nom
	EN - Declaration of conformity - CPT-S/DVS probe adapter cable (9-pin) to Element HV (15-pin)
	EN - Declaration of conformity - CPT-S/DVS probe adapter cable (9-pin) to Element HV (15-pin)
	EN - Mounting template - CPT-S/DVS (9-pin) to Element HV (15-pin) adapter cable
	EN - Declaration of Conformity - CPT-S/DVS (9-pin) Probe Adapter Cable to Element HV (15-pin)
	EN - Declaration of Conformity - CPT-S/DVS (9-pin) Probe Adapter Cable to Element HV (15-pin)
	EN - Declaration of Conformity - CPT-S/DVS Probe Adapter Cable (9-pin) to Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Installation instructions - CPT-S/DVS transducer adapter cable (9-pin) to Element HV (15-pin)
	EN - Installation Manual - CPT-S/DVS Probe Adaptation Cable (9-pin) to Element HV (15-pin)
	EN - Installation Manual - CPT-S/DVS (9-pin) transducer adapter cable for Element HV (15-pin)
	EN - Installation manual - CPT-S/DVS transducer adapter cable (9-pin) to Element HV (15-pin)
	EN - Mounting template - CPT-S/DVS (9-pin) adapter cable for Element HV (15-pin)

Expert opinion

Pol CONIN

Digital Manager

« Integration of CPT-S/DVS transducers with Raymarine Element HV displays »

The Raymarine A80559 adapter cable is a pragmatic solution for recreational boaters considering an upgrade to the Element HV series while retaining their existing CPT-S or CPT-DVS transducer. Its practical value lies in reusing an expensive and often complex component to replace, such as a through-hull transducer, thereby avoiding additional hull work. It primarily targets boat owners with Raymarine transducers from previous generations who do not wish to immediately invest in a new HyperVision probe.

Installing this cable is straightforward: it is a plug-and-play connection between the 9-pin connector of the CPT-S/DVS transducer and the 15-pin port of the Element HV display. This significantly simplifies integration and reduces vessel downtime. This approach differs from a complete solution with a dedicated HyperVision probe by offering an economical alternative. It is particularly relevant if the sonar capabilities of the CPT-S/DVS transducer are deemed sufficient for the user's primary needs or if the budget does not allow for a full replacement.

It is critical to understand the limitations of this adapter: it ensures physical and electrical compatibility but does not convert a CPT-S transducer into a HyperVision probe. To fully utilize the 1.2 MHz frequencies and ultra-high-resolution imaging performance of HyperVision, a probe dedicated to this technology is essential. The A80559 cable is therefore a functional bridge for traditional CHIRP technology, representing a transitional solution or a useful complement rather than a replacement for the native capabilities of Element HV displays.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

CPT-S/DVS (9-pin) to Element HV (15-pin) sonar transducer adapter cable

99,65€

99,65€ ~~108,00€~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine A80559 adapter cable used for?

The Raymarine A80559 adapter cable is designed to connect traditional CHIRP transducers of the CPT-S and CPT-DVS types (equipped with a 9-pin connector) to Element HV series multifunction displays (which use a 15-pin connector). This allows you to reuse your existing transducer when upgrading your navigation system.

Which Raymarine transducers are compatible with this A80559 cable?

This cable is compatible with Raymarine transducers equipped with a 9-pin connector, specifically models in the CPT-S series (for traditional CHIRP sonar) and CPT-DVS series (for DownVision and SideVision sonar). This includes transducers such as the CPT-100, CPT-110, CPT-120, as well as CPT-S models with references E70339, A80446, E70340, A80447, E70341, A80448, and A80545.

Which Raymarine multifunction displays is this cable compatible with?

The A80559 adapter cable is specifically designed for use with Raymarine Element HV series multifunction displays, which feature a 15-pin transducer connector.

Does this cable allow me to use HyperVision features with my CPT-S/DVS transducer?

No, this adapter cable enables your Element HV display to use the traditional CHIRP sonar signals from your CPT-S transducer or the DownVision/SideVision signals from your CPT-DVS transducer. The advanced HyperVision features on Element HV displays require specific HyperVision transducers, which are not included with this cable and are not supported by CPT-S/DVS transducers.

Is it difficult to install the A80559 adapter cable?

The A80559 adapter cable is designed for a simple and direct plug-and-play connection between your existing transducer and your new Element HV display. Simply connect the 9-pin end to your CPT-S/DVS transducer and the 15-pin end to your Element HV display. The cable itself requires no specific tools for installation, but accessing the transducer and display connectors may vary depending on your boat's setup.

What is the advantage of using this adapter cable instead of buying a new transducer?

The main advantage of this cable is that it lets you keep and reuse your existing Raymarine CPT-S or CPT-DVS transducer when upgrading to an Element HV display. This saves significant cost by avoiding the purchase of a new transducer and simplifies installation by eliminating the need to drill new holes in the hull or modify the transom mount for a new transducer.

Is this cable compatible with CPT-DV transducers or older DownVision/SideVision transducers (CPT-100/110/120)?

Yes, this cable is compatible with Raymarine CPT-DV transducers and older DownVision/SideVision transducers such as the CPT-100, CPT-110, and CPT-120. All these transducers use a 9-pin connector, making them adaptable to Element HV displays (15-pin) via cable A80559.