Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Raymarine

D031

Cantilever 230mm

Cantilever Raymarine D031 230 mm for tillerpilot. It provides an offset anchor point for correct installation of the tiller drive cylinder.

Retail priceBenefit from the professional rate

119,17€

119,17€ ~~132,00€~~

Tax included. Shipping calculated at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	Mounting on tiller
Color	Black
Compatible models	Raymarine ST1000, ST2000 autopilots
Product dimensions	Length 230 mm
Finish	Black
Installation type	Mounting on tiller
Kit contents	Cantilever bar, alloy reinforcement plate, threaded mounting clamp, cantilever end cap, nut, washer, epoxy kit, 3 Whitworth countersunk screws
Product type	Autopilot mount

Detailed description

The Raymarine D031 is a 230 mm cantilever for Raymarine tiller drive autopilots.

Offset mounting point for tiller drive

The cantilever is used when the cockpit layout does not allow direct installation of the cylinder sleeve in the correct position on a flat surface. It provides a rigid, offset mounting point to maintain the autopilot’s working geometry.

Compatibility

It is designed for use with Raymarine tiller drive autopilots in the ST1000/ST2000 and Evolution Tiller Drive series, subject to installation dimensions. It does not replace the autopilot, cylinder, or computer.

Skysat advice

Before ordering, check mounting dimensions A/B/C and confirm that a cantilever is necessary rather than a simple pushrod extension, tiller bracket, or pedestal socket.

Documentation

Type	Nom
	EN - Document technique
	EN - Raymarine tiller pilot installation manual - Cantilever Raymarine 230 mm

Expert opinion

« Cantilever to create the correct fixed point »

The cantilever is the solution to choose when the cockpit structure does not naturally provide a fixed point in the right location. It must be considered as a mounting geometry component: the goal is to preserve the alignment of the ram and its effective stroke, not simply to 'hold' the autopilot in place.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Cantilever 230mm

119,17€

119,17€ ~~132,00€~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine D031 cantilever used for?

The D031 creates a remote fixed point for installing a Raymarine tillerpilot when the cockpit structure does not allow direct mounting in the correct position.

What is its length?

This cantilever measures 230 mm.

Which autopilots is it compatible with?

It is used in installations of Raymarine ST1000/ST2000 and Evolution Tiller Drive autopilots according to the installation dimensions.

Does it replace a tiller extension?

No. A pushrod extension adjusts the pushrod distance. The cantilever adjusts or offsets the fixed point on the cockpit side. They address different issues.

Does it replace a tiller extension / tiller extension elbow?

No. The bracket/elbow acts on the tiller side to adjust height. The cantilever acts on the fixed point side of the ram.

Why follow Raymarine's specifications?

Misalignment can stress the ram, reduce its effective stroke, or degrade autopilot accuracy.

Can it be used on any boat?

The cockpit and mounting surface must be suitable for installing a tiller pilot. The choice depends on the boat's dimensions and the pilot's geometry.