DC relay module - 6 channels of 10 A

The Raymarine DCR100-01 DC relay module is a device designed for DC power distribution aboard vessels. It enables remote control and protection of six independent electrical circuits, facilitating modern management of continuous loads.

The DCR100-01 relay module has six channels, allowing it to control up to six independent electrical circuits.

Each channel of the DCR100-01 module has a maximum capacity of 10 amperes. This means it can handle DC loads not exceeding this current per circuit.

The DCR100-01 is specifically designed to manage direct current (DC) circuits. It must not be used for alternating current (AC) applications.

This module is ideal for managing medium-power DC loads such as:

Specific area lightingSecondary bilge pumpsFansOther auxiliary electronic equipment on board.

Using the DCR100-01 provides several advantages:

Remote control: Allows activating or deactivating circuits remotely.Centralized management: Integrates into a modern electrical management system.Reduction in wiring: Contributes to decreased complexity and weight of traditional wiring.Installation flexibility: Panels can be placed in remote locations.

Yes, the DCR100-01 module is designed to provide protection to connected circuits, in addition to remote ON/OFF control. It handles loads up to 10 amperes per channel.

The DCR100-01 relay module is designed to operate in 12V or 24V DC marine electrical systems, which are the standard voltages for DC equipment onboard.

The DCR100-01 module is designed to provide remote ON/OFF control and protection for each circuit. Advanced configuration options may be available via NMEA 2000 integration and compatible multifunction displays.

The DCR100-01 is a relay module. It enables switching and protection of DC circuits, integrating into a digital power distribution system. OctoPlex systems may include power distribution units with circuit breakers, but the DCR100-01 is specifically a relay module.

The DCR100-01 module is designed to integrate into a modern, distributed digital switching system. It is compatible with multifunction displays (MFDs) that support the NMEA 2000® network and associated control systems, such as the Maretron OctoPlex G2-Series.

Yes, the DCR100-01 module is fully compatible with the NMEA 2000® network. It is NMEA 2000® certified (Category B), ensuring interoperability with other certified devices on the same network.

Yes, the DCR100-01 is a component of the Maretron OctoPlex G2-Series system, which is an NMEA 2000® certified power distribution system. It is therefore designed to integrate seamlessly into an existing Maretron OctoPlex system.

The DCR100-01 module connects to the NMEA 2000® network via a standard NMEA 2000® connector. This allows it to communicate with other devices on the network for control and monitoring.

Yes, one of the advantages of digital switching systems like this one is installation flexibility. The DCR100-01 can be placed in locations remote from the loads it controls, reducing the need for large traditional electrical panels and optimizing wiring.

When installing the DCR100-01, it is important to choose a location that ensures:

Protection from the elements (water, excessive humidity unless specifically waterproof).Adequate ventilation to prevent overheating.Easy access for wiring and any potential maintenance.Compliance with marine electrical wiring and safety standards (ABYC, NEC, NFPA).

The DCR100-01 module is powered by the vessel’s DC electrical system (12V or 24V) to manage loads. The NMEA 2000® network also provides power for communication and internal module operation, but a primary power supply is required for power circuits.

For wiring circuits connected to the DCR100-01, it is critical to comply with current marine standards (such as ABYC) regarding wire gauge, short-circuit protection, and connection methods. Each circuit must be wired appropriately to support a maximum load of 10 amps.