Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 12%

Raymarine

A80465

Bronze Through-Hull 0° RV-200 RealVision 3D Transducer, Direct Connection to Axiom (8m Cable)

Designed for Raymarine Axiom displays, the RV-200 RealVision 3D bronze through-hull transducer provides detailed underwater imaging (DownVision, SideVision, RealVision 3D). Its 0° tilt is suited for hulls with minimal or no deadrise. The product includes the transducer with an integrated 8m cable and a bronze M8 x 100mm mounting screw for alignment.

Retail priceBenefit from the professional rate

1.103,14€

1.103,14€ ~~1.254,00€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	RealVision 3D,DownVision,SideVision
Operating voltage	12 V DC
Fishfinder frequencies	200 kHz (CHIRP conical), 350 kHz (RealVision 3D, DownVision, SideVision)
Operating temperature	-25 to +55
Max depth reading	91.0
Transducer material	Bronze
Sonar connector type	Raymarine RealVision 3D (25-pin)
Cable length	8.0
Integrated temperature sensor	Yes
Compatible displays	Raymarine Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL, Axiom 2 XL
Mounting type	Through-hull
Certifications	CE
Beam coverage angle	180
CHIRP high frequency	420
CHIRP low frequency	350
Fishing type	Sea, Lake, Trolling, Vertical
Integrated speed sensor	No

Detailed description

Designed for direct integration with Raymarine Axiom multifunction displays, the RV-200 RealVision 3D bronze through-hull transducer offers an advanced underwater detection solution. This transducer uses RealVision 3D technology to provide detailed imaging of the underwater world, including structures, the seabed, and fish. It is compatible with DownVision and SideVision functions, enabling complete exploration beneath and alongside the vessel.

Design and positioning

The RV-200 stands out with its bronze construction, making it suitable for fiberglass or wooden hulls and offering superior durability in demanding marine environments. With a 0° tilt, this transducer is specifically designed for hulls with minimal or no deadrise, ensuring a sonar beam perpendicular to the seabed for optimal performance. It integrates directly with Axiom systems, including models such as Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL, and Axiom 2 XL, simplifying installation and configuration.

Integration and technical specifications

The integrated 8-meter cable on the RV-200 transducer allows direct connection to compatible Axiom displays, eliminating the need for an external sonar module. This setup ensures fast data transmission and a smooth user interface via the LightHouse 4 software. The mounting system includes an M8 x 100mm bronze hex-head screw for alignment, ensuring a stable and precise installation. Unlike the RV-3xx series in plastic or RV-4xx series in stainless steel, the RV-200 in bronze is positioned for users seeking increased robustness and reliable performance in varied conditions without compromising RealVision 3D imaging quality.

Documentation

Type	Nom
	EN - Technical Drawing - Bronze 0° Through-Hull RV-200 RealVision 3D, direct AXIOM connection (8m cable)
	FR - Manuel d'utilisation - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Technical Drawing - Bronze 0° Through-Hull Sonar RV-200 RealVision 3D, Direct Connection AXIOM (8m Cable)
	EN - Technical Drawing - Bronze Through-Hull 0° RV-200 RealVision 3D Transducer, Direct Connection AXIOM (8m Cable)
	EN - Technical Drawing - Bronze Through-Hull 0° RV-200 RealVision 3D, Direct Connection AXIOM (8m Cable)
	EN - Technical drawing - Bronze through-hull transducer 0° RV-200 RealVision 3D, direct AXIOM connection (8m cable)
	EN - Technical drawing - Bronze 0° thru-hull transducer RV-200 RealVision 3D, direct Axiom connection (8m cable)

Expert opinion

Pol CONIN

Digital Manager

« Technical analysis: Raymarine RV-200 RealVision 3D through-hull transducer for Axiom »

The Raymarine RV-200 RealVision 3D through-hull transducer is a strategic choice for sailors and anglers equipped with an Axiom multifunction display whose vessel has a hull with low or zero deadrise. Its bronze construction is designed for permanent installations where robustness and corrosion resistance are critical, particularly in saltwater or areas with high marine activity. The RealVision 3D technology is especially valued for detailed seabed mapping and precise detection of submerged structures, offering a clear advantage for sport fishing or navigation in complex waters.

The main advantage of this transducer lies in its direct connection to Axiom displays, which significantly simplifies system architecture by eliminating the need for an external sonar module. This not only reduces overall cost and footprint but also potential failure points. The through-hull installation requires expertise for hull drilling and sealing, but the 0° tilt facilitates alignment on flat hulls. It is crucial to ensure the boat meets this hull angle requirement to maximize sonar beam performance.

While bronze offers excellent durability, it is important to note that this transducer is not recommended for aluminum hulls without specific precautions to prevent galvanic corrosion. For hulls with more pronounced deadrise, it would be preferable to choose transducers with a tilted element (12° or 20°) to compensate for the hull angle and ensure optimal sonar coverage. The RV-200 is therefore a targeted, high-performance, and integrated solution, ideal for applications where a 0° bronze through-hull transducer is technically justified.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Bronze Through-Hull 0° RV-200 RealVision 3D Transducer, Direct Connection to Axiom (8m Cable)

1.103,14€

1.103,14€ ~~1.254,00€~~

Frequently Asked Questions

Need help? Contact us

What is the main function of the Raymarine RV-200 RealVision 3D transducer?

The RV-200 RealVision 3D transducer is designed to provide advanced and detailed underwater imaging. It uses RealVision 3D technology to display structures, the seabed, and fish with exceptional clarity. Additionally, it integrates DownVision and SideVision functions for complete exploration beneath and alongside your vessel.

Which Raymarine multifunction displays is the RV-200 transducer compatible with?

The RV-200 transducer is designed for direct integration with Raymarine multifunction displays from the Axiom family. It is compatible with the following models:

Raymarine Axiom
Raymarine Axiom+
Raymarine Axiom Pro
Raymarine Axiom 2 Pro
Raymarine Axiom XL
Raymarine Axiom 2 XL

For which hull types is the RV-200 0° depth sounder specifically designed?

The RV-200 depth sounder with a 0° tilt is specifically designed for boat hulls with minimal or no deadrise. This design ensures a sonar beam perpendicular to the seabed, guaranteeing optimal imaging performance. It is suitable for fiberglass or wooden hulls.

What is the RV-200 depth sounder made of and what are its advantages?

The RV-200 depth sounder is made of bronze. This material provides superior durability and increased robustness, making it particularly suitable for harsh marine environments and fiberglass or wooden hulls.

Does the RV-200 transducer require an external sonar module to work with an Axiom display?

No, the RV-200 transducer is designed for direct connection to compatible Raymarine Axiom displays. Its integrated 8-meter cable allows the transducer to plug directly into the display, eliminating the need for an external sonar module. This setup simplifies installation and ensures fast data transmission.

How is the RV-200 transducer mounted to the boat hull?

The RV-200 transducer is mounted to the hull using a robust mounting system. This includes an M8 x 100 mm bronze hex-head screw designed to ensure stable and precise alignment of the transducer.

Which sonar technologies are integrated in the RV-200 sounder?

The RV-200 sounder integrates several advanced Raymarine sonar technologies for comprehensive underwater vision:

RealVision 3D: For detailed three-dimensional representation of the seabed and structures.
DownVision: For a photorealistic view of the underwater world beneath the boat.
SideVision: For a clear side view of structures and fish on either side of the boat.

Is a specific calibration required after installing the RV-200 transducer?

Yes, after installing the RV-200 transducer, a RealVision™ AHRS (Attitude and Heading Reference System) calibration is recommended. This calibration is essential to ensure the accuracy and optimal quality of RealVision 3D imaging, by ensuring the transducer correctly compensates for the boat's movements.