Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 7%

Raymarine

A80604

Through-hull plastic sonar 0° HV-300 HyperVision (6m cable)

The 0° through-hull plastic transducer HV-300 HyperVision by Raymarine (A80604) is designed for flat hulls, providing detailed underwater imaging thanks to HyperVision™ technology. It integrates with Raymarine Element and Axiom systems that are compatible.

This model is an active component of the HyperVision range and is not obsolete. It comes with a 6-meter cable.

Retail priceBenefit from the professional rate

393,59€

393,59€ ~~426,00€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	CHIRP, DownVision, SideVision, HyperVision
Operating voltage	12
Fishfinder frequencies	200, 350, 1200
Operating temperature	-25 to 55
Max depth reading	274.0
Transducer material	Plastic
Sonar connector type	HyperVision 15-pin
Cable length	6.0
Product width	60 mm
Integrated temperature sensor	Yes
Product height	40 mm
Compatible displays	Raymarine Element
Product depth	130 mm
IP rating	IPX6/IPX7
Wireless connectivity	No
Mounting type	Through-hull
Certifications	CE (EMC Directive 2014/30/EU)
Temperature measurement range	-25 to 55
Beam coverage angle	25° (conical), 60° (fore-aft)
CHIRP high frequency	1200
CHIRP low frequency	200
Fishing type	Sea, Lake, Vertical, Trolling
Integrated speed sensor	No
Release year	2019.0
User level	Intermediate
Warranty	2.0

Detailed description

Designed for optimal integration on flat hulls or those with a shallow keel angle, the Raymarine 0° HV-300 HyperVision through-hull plastic transducer (reference A80604) provides an advanced underwater detection solution. This transducer is part of Raymarine’s HyperVision™ range, known for its high-resolution imaging capabilities, similar to those of the HV-300THP-P and HV-300THP-S models, but specifically tailored for installations requiring a 0° angle without a compensation block. It is compatible with Raymarine multifunction displays that support HyperVision technology.

HyperVision Technology and Installation

HyperVision™ technology delivers detailed views of the seabed and submerged structures, essential for fishing and navigation in complex areas. Installing the HV-300 through-hull transducer (A80604) requires the use of marine-grade neutral-cure polyurethane sealing products, excluding acetate or silicone-based products. A 6-meter cable is integrated to facilitate connection to your system. For consistent performance, it is critical to apply only water-based antifouling paints and to avoid operating the transducer out of the water to prevent overheating.

Maintenance and Positioning

Maintenance of the HV-300 transducer involves routine checks, regular cleaning, and reapplication of antifouling paint according to the manufacturer’s instructions. Compared to the HV-100, a transom-mounted model, the through-hull HV-300 delivers superior performance at high speeds and reduced turbulence due to its direct positioning in the water flow beneath the hull. The 0° model (A80604) stands out for its ease of integration on hulls where the keel angle does not require correction, optimizing the clarity of images produced by HyperVision technology.

Documentation

Type	Nom
	EN - Technical drawing - Through-hull plastic 0° transducer HV-300 HyperVision (6m cable)
	EN - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Installation instructions - 0° Through-hull plastic transducer HV-300 HyperVision (6m cable)
	FR - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Mounting template - HV-300 HyperVision plastic through-hull transducer 0° (6m cable)
	EN - Mounting template - 0° through-hull plastic transducer HV-300 HyperVision (6m cable)
	EN - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	FR - Notice d'installation - Sonde plastique traversante 0° HV-300 HyperVision (Câble 6m)
	EN - Mounting template - 0° through-hull plastic transducer HV-300 HyperVision (6m cable)
	EN - Mounting template - HV-300 HyperVision plastic through-hull transducer (6m cable)

Expert opinion

Pol CONIN

Digital Manager

« Raymarine HV-300 HyperVision: 0° through-hull transducer for flat hulls »

The Raymarine HV-300 HyperVision transducer (A80604) is a suitable choice for flat-hull vessels or installations with a zero-degree deadrise angle, aiming to maximize underwater imaging clarity. Its 0° plastic through-hull design is specifically intended for setups where a fairing block is unnecessary or undesired, simplifying integration and deployment of Raymarine's HyperVision technology.

Unlike transom-mount models such as the HV-100, a through-hull installation delivers superior acoustic performance, particularly at high speeds, by minimizing turbulence and interference. Selecting this 0° model is critical: it must precisely match the deadrise angle of the hull section selected for installation to ensure optimal beam coverage. Incorrect installation on a hull with significant deadrise will degrade sonar return quality. Using a neutral-cure marine polyurethane sealant is mandatory to ensure watertightness and longevity of the installation.

This transducer integrates seamlessly with Raymarine Element and Axiom systems compatible with HyperVision, providing users with highly detailed structure and fish detection capabilities. Sufficient access must be planned for drilling, tightening, and routing the provided 6m cable. For maintenance, only water-based antifouling paint should be applied; copper- or ketone-based products are prohibited for plastic transducers.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Through-hull plastic sonar 0° HV-300 HyperVision (6m cable)

393,59€

393,59€ ~~426,00€~~

Frequently Asked Questions

Need help? Contact us

What type of transducer is this Raymarine HV-300 and for what hull angle is it designed?

This transducer is a through-hull plastic model, specifically designed for flat hulls or those with a 0° deadrise angle. This means it is optimized for installation without an angle correction block on hulls that do not require compensation.

Which imaging technology is used by the HV-300 HyperVision depth sounder?

The HV-300 uses Raymarine’s HyperVision™ imaging technology. This technology is known for its high-resolution imaging capabilities, providing detailed views of the seabed and submerged structures, which is essential for fishing and navigation in complex areas.

Which Raymarine multifunction displays is this transducer compatible with?

This transducer is compatible with Raymarine multifunction displays that support HyperVision™ technology. For optimal compatibility, ensure your display supports this specific technology.

What type of sealant should I use to install the HV-300 depth sounder?

For the installation of the HV-300 through-hull depth sounder, you must use only marine-grade polyurethane-based sealants. Do not use acetate or silicone-based products, as they can damage the plastic components of the transducer.

Can I apply any antifouling paint to the transducer?

No, you must only apply water-based antifouling paints to the transducer. Do not use ketone-based or copper-based paints, as this could affect the transducer's performance and void the product warranty.

Is it possible to test or use the depth sounder out of the water?

No, it is mandatory to test and use the depth sounder only when it is submerged in water. Operating it out of the water may cause overheating of the transducer and potentially damage the product.

What is the length of the cable supplied with this transducer?

The 0° through-hull plastic transducer HV-300 HyperVision comes with an integrated 6-metre cable. This length is designed to simplify connection to your onboard electronics system.

What are the advantages of a through-hull HV-300 transducer compared to a transom-mount transducer?

Compared to a transom-mount transducer (such as the HV-100), the through-hull HV-300 provides better performance, particularly at high speeds, and reduced turbulence. Its direct positioning in the water flow beneath the hull delivers more stable and accurate readings, which is critical for high-quality sonar imaging.