Tube-mounted Rail Pod - For single-display Pod

The Rail Pod mount on a Scanstrut SPR-1i-RM tube is a bracket specifically designed to secure a housing (Pod) containing a single display to a tube, such as a cockpit coaming, arch, or tiller post. It allows you to position your electronic instrument securely and ergonomically aboard your boat.

A "Pod 1 display" refers to a waterproof Scanstrut enclosure (such as a Scanpod) designed to hold a single instrument or display. The Rail Pod SPR-1i-RM is the mounting bracket for this type of enclosure. The "Pod 1 display" enclosure itself is typically not included with the bracket and must be purchased separately.

The Rail Pod mount for Scanstrut SPR-1i-RM tube is designed for installation on common tube diameters in marine environments. It is generally compatible with tubes from 25 mm (1 inch) to 33.7 mm (1 1/3 inches). Inserts can be provided to precisely adapt to different diameters.

Yes, the Rail Pod mount on the Scanstrut SPR-1i-RM tube is designed to provide adjustment flexibility. It allows tilting of the display housing to optimize the viewing angle, ensuring maximum readability from different positions on board.

The SPR-1i-RM Pod Rail integrates a discrete cable management system. Your display cables can be routed inside the bracket and mounting tube (if the tube allows), providing a clean installation protected from elements and snags.

The Pod Rail itself is designed to withstand marine conditions. However, the overall waterproofing will depend primarily on the "Pod 1 display" housing you install in it. Scanstrut housings are typically waterproof to IP standards, and the mount is designed to maintain this waterproofing when correctly assembled with a compatible housing.

The Rail Pod installation is designed to be performed by a knowledgeable user. It involves attaching the mount to the tube using the supplied hose clamps and then assembling the "Pod 1 display" housing onto the Rail Pod. Detailed instructions are typically included to simplify the process.

This mount is specifically designed for Scanstrut "Pod 1 display" housings. These housings are then adapted to accommodate a wide range of marine electronic instruments, such as multifunction displays, data repeaters, autopilot screens, or small chartplotters, provided they fit within the compatible housing dimensions.

The SPR-1i-RM Pod Rail is primarily designed for mounting on small-diameter horizontal or vertical tubes, such as railings or tiller pedestals. For mast mounting, which typically has a larger diameter, Scanstrut offers specific mast mounts with different fastening systems.

Yes, as a Scanstrut marine product, the Rail Pod is designed to withstand the vibrations and shocks inherent to the nautical environment. Its robust design and quality materials ensure stable and secure mounting of your instrument, even in rough sea conditions.

For installing the Rail Pod, you will generally need basic tools such as an Allen key (or adjustable wrench, depending on the screw type), a screwdriver, and potentially a drill if you need to create cable passages or secure the display unit to the bracket. Specific tools are detailed in the installation manual.

Yes, the Rail Pod design includes cable passages. This allows cables to be routed discreetly inside the mount and the mounting tube (if the tube is hollow), providing a very clean and professional installation while protecting the cables from external elements.

Yes, the clamping collar mounting system allows the Rail Pod to be removed from the tube relatively easily without causing permanent damage. This can be useful for wintering, maintenance, or repositioning the equipment.

Yes, the Rail Pod mount on a Scanstrut SPR-1i-RM tube is universally suitable for marine environments, whether on a sailboat or a powerboat. It can be installed on any compatible tube or rail diameter, providing a versatile mounting solution for various types of vessels.

Yes, the Rail Pod is usually supplied with all the hardware and parts required to securely mount it on a tube and to assemble the "Pod 1 display" housing to the bracket. This includes hose clamps and mounting screws.

The SPR-1i-RM Pod Rail is specifically designed for mounting on round-section tubes. The clamps are shaped to perfectly fit a round tube. It is not suitable for mounting on square or oval tubes.