VICTRON ENERGY Chargeur solaire BlueSolar MPPT 100/30

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 19%

Victron Energy

SCC020030200

BlueSolar MPPT 100/30 Solar Charger

The BlueSolar MPPT 100/30 solar charger from VICTRON ENERGY optimizes solar energy production with its ultra-fast MPPT technology, ensuring high efficiency. It automatically manages 12/24 V systems with a maximum PV voltage of 100 V and a charging current of 30 A. This component is designed for integration into a marine electrical installation.

Retail priceBenefit from the professional rate

115,97€

115,97€ ~~142,80€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Tension d'absorption	14.4V (12V), 28.8V (24V)
Compatibilité chimie de batterie	Lead, Lithium
Compatible Battery Voltage V	12V, 24V
Ip Rating Connection Area	IP22
Ip Rating Electronic Components	IP43
Mppt Max Charge Current A	30
Mppt Max Pv Voltage V	100
Dimensions du produit (L x l x H)	130 x 186 x 70
Solar Mppt Integrated	Yes
Weight	1.3

Detailed description

Designed to optimize battery charging from solar panels, the VICTRON ENERGY BlueSolar MPPT 100/30 charge controller uses ultra-fast MPPT (Maximum Power Point Tracking) technology. This technology ensures maximum energy recovery by continuously adjusting the voltage and current parameters of the photovoltaic panel for conversion efficiency up to 98%. The charge controller is compatible with 12 V and 24 V battery systems, with automatic system voltage selection, and supports a maximum PV open-circuit voltage of 100 V.

Performance and features

The BlueSolar MPPT 100/30 delivers a maximum charging current of 30 A to the battery. It integrates a multi-stage adaptive charging algorithm (bulk, absorption, float, adjustable equalization) to extend the lifespan of lead-acid or lithium batteries. Absorption voltages (14.4 V/28.8 V) and float voltages (13.8 V/27.6 V) are configurable, as is the equalization voltage (16.2 V/28.8 V). Temperature compensation of -16 mV/°C for 12 V and -32 mV/°C for 24 V is also included for precise charging.

Installation and environment

This solar charge controller features 16 mm² / AWG6 power terminals and weighs 1.3 kg. Its compact dimensions are 130 x 186 x 70 mm (h x w x d). It offers IP43 protection for electronic components, protecting against tools and water splashes, and IP22 for the connection area. The charge controller operates in a temperature range of -30 to +60 °C, maintaining its nominal output power up to 40 °C. Standby power consumption is 30 mA at 12 V and 20 mA at 24 V. Battery fuses between 35 A and 40 A are recommended for system protection.

Documentation

Type	Nom
	FR - Manuel d'installation et d'utilisation - Chargeur solaire BlueSolar MPPT 100/30
	FR - Fiche technique - Chargeur solaire BlueSolar MPPT 100/30

Expert opinion

Pol CONIN

Digital Manager

« Technical analysis of the BlueSolar MPPT 100/30 solar charger »

The BlueSolar MPPT 100/30 solar charger from VICTRON ENERGY is an essential component for embedded power systems requiring efficient solar management. Its MPPT technology, capable of locating the maximum power point ultra-rapidly, is particularly relevant in marine environments. This translates to maximizing energy extracted from panels, even in changing light conditions, which is crucial for maintaining battery charge.

During installation, it is important to note that this BlueSolar model does not include integrated Bluetooth connectivity, unlike the SmartSolar range. For advanced monitoring and configuration via the VictronConnect app, an external VE.Direct Bluetooth dongle will be required. The power terminals and the recommendation for a battery fuse highlight the need for adequate wiring and protection to handle the 30 A charge current. Its automatic 12/24 V voltage detection simplifies initial setup. While the IP43 protection rating for the electronics is sufficient for installation in a protected environment, the connection area’s protection means it must be mounted in a location shielded from direct water spray and excessive moisture.

This charger is a solid choice for applications where robustness and charging efficiency are priorities, and where direct remote monitoring is not a critical requirement without additional accessories. It integrates well within a Victron Energy power architecture, particularly for lead-acid or lithium batteries, though for lithium batteries with CAN-bus, charge management is delegated to the battery’s BMS.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

BlueSolar MPPT 100/30 Solar Charger

115,97€

115,97€ ~~142,80€~~

Frequently Asked Questions

Need help? Contact us

What is MPPT technology and how does it work on this charger?

The ultra-fast MPPT (Maximum Power Point Tracking) technology is used by the BlueSolar MPPT 100/30 solar charger to optimize energy recovery from solar panels. It continuously adjusts the voltage and current parameters of the photovoltaic panel to ensure maximum conversion efficiency, up to 98%.

What is the maximum conversion efficiency of this solar charger?

The BlueSolar MPPT 100/30 solar charger delivers a maximum conversion efficiency of 98%.

What is the maximum nominal power of solar panels I can connect to a 12 V or 24 V system?

For a 12 V battery system, the maximum PV nominal power is 440 W. For a 24 V battery system, it is 880 W.

What is the maximum charging current this regulator can supply to the battery?

The BlueSolar MPPT 100/30 solar charger delivers a maximum charging current of 30 A to the battery.

What are the dimensions and weight of the BlueSolar MPPT 100/30 charger?

The charger dimensions are 130 x 186 x 70 mm (height x width x depth) and its weight is 1.3 kg.

Does the BlueSolar MPPT 100/30 solar charger have Bluetooth connectivity?

No, BlueSolar models do not have integrated Bluetooth functionality. Only SmartSolar models do.

What is the operating temperature range of the charger?

The charger operates within a temperature range of -30 to +60 °C and maintains its nominal output power up to 40 °C.

How does the charger handle the different charging phases of the battery?

The charger integrates a multi-stage adaptive charging algorithm that includes the following phases:

Bulk (bulk charge)AbsorptionFloat (float charge)Equalization (adjustable)These stages are designed to extend battery life.

Does the charger include temperature compensation for battery charging?

Yes, temperature compensation is built in for accurate charging. It is -16 mV/°C for 12 V systems and -32 mV/°C for 24 V systems.

What is the ingress protection (IP) rating of this solar charger?

The charger has an IP43 protection rating for the electronic components, protecting them against tools and water projections at less than 60 degrees from the vertical. The connection area has an IP22 protection rating.