VE.Direct 1.8m cable

The Victron Energy VE.Direct 1.8m cable is a communication accessory designed to interconnect compatible devices from the brand. It enables data exchange between two Victron Energy products equipped with a VE.Direct port, facilitating monitoring and configuration of your energy system.

The primary function of the VE.Direct cable is to establish a point-to-point serial communication connection between two Victron Energy devices. It is essential for transmitting data such as voltage, current, power, battery state of charge, and alarm information, enabling precise management and monitoring of your installation.

This VE.Direct cable has an exact length of 1.8 meters. This length provides sufficient flexibility for many installation setups, especially in spaces where devices are not directly adjacent.

The cable uses connectors specific to the VE.Direct protocol from Victron Energy. These connectors are designed to fit perfectly into the VE.Direct ports on compatible equipment from the brand.

Yes, absolutely. The VE.Direct protocol is specifically designed to transmit a variety of system data, including voltage, current, power information, battery state of charge, as well as alarms and operating states of connected devices.

No, the VE.Direct cable is not designed for battery charging or carrying high power currents. Its function is exclusively dedicated to data communication between compatible Victron Energy devices. For charging, specific power cables are required.

The main difference lies in their design and application. The VE.Direct protocol is a proprietary serial point-to-point communication interface from Victron Energy, designed for direct and dedicated connections between two devices. In contrast, data buses like NMEA 2000 are multi-master networks allowing many devices from different brands to communicate over a shared bus, with increased complexity and versatility.

The weight of this 1.8-meter VE.Direct cable is approximately 0.07 kilograms.

Yes, this 1.8 m VE.Direct cable is an original Victron Energy product, designed and manufactured according to the brand’s specifications to ensure compatibility and optimal performance with their equipment.

This cable is ideal for applications requiring reliable communication between Victron Energy devices, particularly in embedded energy systems for boats, recreational vehicles (motorhomes, caravans), or any off-grid setup where monitoring and management of Victron equipment is essential. Its 1.8m length provides good flexibility for connections between nearby or slightly distant devices.

This cable is compatible with a wide range of Victron Energy devices equipped with a VE.Direct port. This includes:

Victron Energy MPPT solar charge controllers (e.g., SmartSolar MPPT)
Victron Energy battery monitors BMV (e.g., BMV-712 Smart)
Some Victron inverters and chargers
Supervision devices such as Color Control GX or Cerbo GX
VE.Direct to Smart Bluetooth adapters
It is always recommended to check your Victron device documentation to confirm the presence of a VE.Direct port.

Yes, absolutely. This 1.8m VE.Direct cable is perfectly suited for connecting a Victron Energy MPPT solar charge controller (such as the SmartSolar MPPT models) to another VE.Direct-compatible device, such as a BMV battery monitor, a Cerbo GX, or a Bluetooth adapter, for monitoring and configuration.

Yes, this cable is fully compatible with Victron BMV battery monitors (e.g., BMV-712 Smart) that have a VE.Direct port. It enables battery data transmission to another Victron device or a control panel.

Yes, this cable can be used to connect compatible Victron Energy VE.Direct devices (such as MPPT controllers or BMV monitors) to a Cerbo GX or Color Control GX. These GX devices act as a communication bridge to centralize data from your system.

No, the VE.Direct protocol is a proprietary communication protocol from Victron Energy. This cable is therefore not compatible with devices from other brands that do not use this specific interface.

No, this standard VE.Direct cable does not allow a direct connection to a computer. To connect a Victron Energy device to a computer via VE.Direct, you will need a specific adapter, such as the Victron Energy VE.Direct to USB interface cable, which converts the VE.Direct protocol into a USB interface recognizable by a computer.

To check if your Victron Energy device has a VE.Direct port, you can:

Consult the user manual of your device, which will detail the available communication ports.Physically inspect the device: the VE.Direct port is typically a small 4-pin connector, often labeled "VE.Direct" or identifiable by a serial communication symbol.Check the product datasheet on the Victron Energy website.

Connecting the 1.8m VE.Direct cable is straightforward: simply insert one end of the cable into the VE.Direct port of the first Victron Energy device and the other end into the VE.Direct port of the second Victron Energy device you wish to connect. Ensure the connectors are fully inserted and secured.

No, there is no specific wiring direction for the VE.Direct cable. Both ends of the cable are identical and can be connected to either Victron Energy compatible device without distinction.

It is not recommended to extend a VE.Direct cable by connecting it to another VE.Direct cable. To ensure reliable communication and avoid any signal loss or interference, it is preferable to use a cable of the appropriate length from the start. Victron Energy offers VE.Direct cables in various lengths to suit different installation requirements.