Navico NAC-D Ordinateur de pilote automatique

Navico NAC-D Ordinateur de pilote automatique - photo 2

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 25%

Navico

000-15621-001

NAC-D Navico autopiloodi arvuti

The Navico NAC-D (000-15621-001) autopilot computer is a steer-by-wire solution designed for Electronic Vessel Control (EVC) systems. It integrates with electronic steering systems from Volvo IPS/EVC, Yamaha Helm Master, SeaStar Solutions Optimus, and Yanmar VC10/JC10 via NMEA 2000. This compact computer delivers precise steering using Continuum Steering and SteadySteer technology. The product includes the NAC-D computer with built-in Micro-C connectors for simplified installation.

Public priceGet pro pricing

1.008,76€

1.008,76€ ~~1.346,94€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Maksimaalne elektritarve	750 W
Tüüpiline elektritarve	Selon l'actionneur de barre
NMEA 2000 koormuse ekvivalents (LEN)	1
Töötav pinge	12/24 V DC
Töötamise temperatuur	-25 à +55
Soovitatav sulavkaitse suurus	30 A
Toote laius	86.5 mm
Toote kõrgus	20.0 mm
Toote sügavus	11.5 mm
IP-tunnus	IPX5
Võrguühilduvus	NMEA 2000,NMEA 0183
Traadivõrk	NMEA 2000
Montaažitüüp	Montage en surface
Sertifikaadid	CE,IEC 60945
Juhimoodid	Auto, Vent, Navigation, Dérive nulle, Barre manuelle
Aktuaatori tüüp	Direction par câble ou numérique (Volvo, Yamaha, Optimus, Yanmar)
Topeltruderi toestus	Oui, via l'intégration avec les systèmes de direction électronique (EVC)
NMEA 0183 baudikiirus	4.8, 9.6, 19.2, 38.4
NMEA 0183 raamid	1 port IN/OUT (4.8, 9.6, 19.2 & 38.4 kbaud)
NMEA 0183 pordid	1
Salvestustemperatuur	-30 à +70
Sõrmi brauseriga seadistamine	Non
Liikumise korrektsiooni toetus	Oui
Hoiatusväljund	Oui
Alarm Output Max Current Ma	100
Australian Business Number	96124340898
Boat Type Compatibility	Configurable
Kompassi ohutuskaugus (mm)	500
Pidevvoolutugevus (A)	8
Drive Output Current Max A	3
Drive Output Current Min Ma	10
Drive Output Voltage	12/24 V DC
EMC direktiiv	2014/30/EU
EMC testimise labor	TÜV SÜD America Inc.
EMC testimise aruande number	SC1406321
Eu Authorized Representative Address	Navico Holding AS, Nyaaskaiveien 2, NO-4374 Egersund, Norway
Hs Code Full	9014804000
Maksimaalne töökeskkonna niiskus	100
Maritime Navigation Standard	Maritime Navigation and radiocommunication equipment and Systems – General Requirements – Methods of testing and required test results.
Nmea0183 Bidirectional	Oui
NMEA 2000 ühenduse tüüp	Micro-C
Nmea2000 Port Count	1
Nominal Drive Voltage Options	12 V,24 V
Pakendatud kaal (kilogrammides)	0.208
Tipptugevus (A)	12
Toote kaal	0.7
Radiocommunications Standard	Radiocommunications (Electromagnetic Compatibility) standard 2017
RCM deklaratsiooni kuupäev	1 - Nov - 2016
Rcm Declaration Entity Address	Unit 5/12 Mars Road Lane Cove NSW 2066 Australia.
Rcm Declaration Entity Name	Navico Australia Pty Ltd.
RCM deklaratsiooni allkirjastaja	Howard Evans / Operations director
Rudder Feedback Voltage Range	0-5 V
Shock And Vibration Standard	EN60945
Steering System Brand Compatibility	Volvo,Yamaha,Optimus (SEASTAR),Yanmar
Supply Voltage Tolerance Percent	+/- 10-30
Seadme numbri järgi jälgimine	serial
Vessel Length Compatibility M	Configurable
Garantii	2

Detailed description

Disainitud kaasaegsetele elektroonilistele roolimissüsteemidele, Navico NAC-D arvuti (tähis 000-15621-001) on "steer-by-wire" lahendus. See võimaldab otsest ühendust mootori juhtimissüsteemidega (EVC) sellistelt tootjatelt nagu Volvo IPS/EVC, Yamaha Helm Master/single engine, SeaStar Solutions Optimus ja Yanmar VC10/JC10. Erinevalt traditsioonilistest autopiloodi arvutitest nagu NAC-2 või NAC-3, mis vajavad hüdraulilist pumpa ja rooli nurgaandurit, lihtsustab NAC-D paigaldust oluliselt, ühendudes otse NMEA 2000 võrgustiku kaudu ilma lisahüdraulikakomponentideta ja ilma rooli kalibreerimiseta dokis.

Täiustatud ühenduvus ja integratsioon

NAC-D eristub NMEA 2000 ühenduvusega, pakkudes kaht Micro-C porti ja 2 LEN-i sujuvaks integreerumiseks laeva elektroonilise ökosüsteemiga. Seade ei toeta NMEA 0183, Bluetoothi ega Wi-Fi’d, keskendudes töökindlale kommunikatsioonile CAN-bus süsteemidega, nagu näiteks Optimus roolimisega. Seade töötab CAN-võrgustiku toitel (9–16 V) ning tarbib tüüpilise voolutarbega 40 mA, mis teeb sellest energiasäästliku lahenduse. Juhtimine toimub kas spetsiaalsete juhtseadmete (nt AP 44 või AP 48) või Simradi mitmefunktsiooniliste ekraanide kaudu, mis on sellega ühilduvad.

Jõudlus ja juhtimisvõimalused

See arvuti sisaldab Navico Continuum Steering tehnoloogiat, tagades täpse ja töökindla kurssi hoidmise. SteadySteer™ funktsioon optimeerib roolimise jõudlust erinevatel kursustel, automaatselt lülitudes kahe kiirusprofiili vahel. NAC-D pakub laia valikut täiustatud pööramisskeemidest, nagu U-pööramine, spiraalpööramine, siksakpööramine, C-pööramine, ruutpööramine, S-pööramine ning sügavuse jälgimine (Depth Counter Tracking). Seadmel on IP44 veekaitseindeks, kaalub 0,1 kg ja on kompaktsete mõõtmetega (86,5 x 20,0 x 11,5 mm), võimaldades diskreetse paigalduse kaabli kõrvale, nõudes 0,5 meetri kaugust kompassist.

Documentation

Type	Nom
	EN - Manuel de mise en service - NAC-D Ordinateur de pilote automatique
	EN - Guide d'installation - NAC-D Ordinateur de pilote automatique
	EN - Guide d'installation - NAC-D Ordinateur de pilote automatique
	EN - Manuel de mise en service - NAC-D Ordinateur de pilote automatique
	FR - Manuel de mise en service - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de Conformité CE - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de conformité - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de Conformité RCM - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de Conformité CEM - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de conformité CE - NAC-D Ordinateur de pilote automatique
	EN - Guide d'installation - NAC-D Ordinateur de pilote automatique

Expert review

Pol CONIN

Digital Manager

« Digital intelligence for modern electronic steering systems »

Navico's NAC-D represents a significant advancement in autopilot computers, specifically designed for steer-by-wire steering architectures and electronic engine control systems (EVC). Its practical value is highest for owners of vessels equipped with modern propulsion systems such as Volvo IPS, Yamaha Helm Master, SeaStar Optimus, or Yanmar, who seek to integrate an autopilot without the complexity of traditional hydraulic systems.

From an installation perspective, the NAC-D greatly simplifies the process. It does not require the addition of a hydraulic pump, nor the installation of a rudder angle sensor, nor even dockside rudder calibration. Its integration is primarily via the NMEA 2000 network, with only two Micro-C connectors to plug in. This significantly reduces installation time and complexity compared to NAC-2 or NAC-3 computers, which are intended for conventional hydraulic steering systems. It is critical to note that the NAC-D is not a universal solution; the vessel must already have a compatible electronic steering system for this computer to function.

The NAC-D's differentiation lies in its role as a direct digital interface between the autopilot and the engine's electronic steering system. It does not "drive" a pump but sends precise digital commands to the existing EVC system. This makes it particularly suitable for modern motorboats where space is often limited and where the reliability of a fully digital control chain is sought. However, its main limitation is its dependence on a pre-existing EVC system; it cannot be used to convert a hydraulic or mechanical steering system into an autopilot without a major rudder overhaul.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

NAC-D Navico autopiloodi arvuti

1.008,76€

1.008,76€ ~~1.346,94€~~

Complete your installation with

Complementary equipment

B&G Pupitre de commande du pilote automatique Triton²

B&G Pupitre de commande du pilote automatique Triton² - photo 2

B&G

Triton² autopiloodi juhtpaneel

Ref : 000-13296-001

325,56€

325,56€ ~~434,70€~~

Simrad

Jälgur NSX 3012 12"

Ref : 000-15223-001

2.741,39€

2.741,39€ ~~3.298,80€~~

B&G Traceur de cartes Zeus 3S 9" avec carte de base du monde

B&G Traceur de cartes Zeus 3S 9" avec carte de base du monde - photo 2

B&G

Kaardi jälgimisseade Zeus 3S 9" B&G koos maailma põhikaardiga

Ref : 000-15411-001

2.249,10€

2.249,10€ ~~2.998,80€~~

B&G Traceur de cartes Zeus 3S 12" avec carte de base du monde

B&G Traceur de cartes Zeus 3S 12" avec carte de base du monde - photo 2

B&G

Kaardijälgija Zeus 3S 12" põhikaardiga

Ref : 000-15412-002

3.981,96€

3.981,96€ ~~4.772,38€~~

Zeus³S Glass Helm 19" Display Only | B&G Sailing USA

B&G

Zeus³S Glass Helm MFD 19" ekraan B&G

Ref : 000-15050-001

7.270,90€

7.270,90€ ~~8.788,32€~~

B&G Afficheur numérique Triton² 4,1" - photo 2

B&G

B&G Triton² 4,1" digitaalne näidik

Ref : 000-13294-001

525,96€

525,96€ ~~648,90€~~

B&G

B&G Nemesis kuvari

Ref : ODOO-511

0,00€

B&G

Hub Némésis

Ref : 000-15683-001

354,34€

354,34€ ~~472,50€~~

B&G

Nemesis ühenduskaabel B&G

Ref : 000-15740-001

81,36€

81,36€ ~~82,80€~~

B&G Écran d'affichage 10/10HV pour système H5000/Triton

B&G

10/10HV kuvari B&G H5000/Triton süsteemile

Ref : 000-11087-001

576,26€

576,26€ ~~755,32€~~

B&G 20/20HV Display | Pacific Yacht Systems

B&G

20/20HV kuvar H5000/Triton süsteemile

Ref : 000-11088-001

865,39€

865,39€ ~~1.079,77€~~

B&G Écran d'affichage 30/30HV pour système H5000/Triton

B&G

30/30HV kuvari B&G H5000/Triton süsteemile

Ref : 000-11089-001

1.601,63€

1.601,63€ ~~2.141,38€~~

Frequently asked questions

Need help? Contact us

What is the NAC-D autopilot computer used for?

The NAC-D is the decision-making core of your autopilot system. Unlike classic models, it is specifically designed to directly control electronic and digital cable-driven steering systems, delivering exceptionally precise steering.

With which steering systems is the NAC-D computer compatible?

This computer is optimized for modern electronic steering systems. It is notably compatible with Volvo, Yamaha, Optimus (SeaStar), and Yanmar steering systems.

What is the difference between the NAC-D and the NAC-2 or NAC-3 models?

The NAC-2 and NAC-3 controllers are designed to provide high power output (up to 750 W) to drive hydraulic pumps or mechanical actuators. The NAC-D, by contrast, is dedicated to directly controlling digital steering systems, which do not require this level of output power.

Does the NAC-D support the SteadySteer function?

Yes, the NAC-D natively integrates support for the SteadySteer assistance technology. This allows you to take manual control at any time to make a heading correction without needing to disengage the autopilot beforehand.

What are the turning modes managed by the NAC-D autopilot?

The NAC-D offers advanced navigation algorithms including multiple turning models: Spiral, Zigzag, Continuous rate of turn. It also automatically adapts to the vessel's dynamics thanks to its profile transition function between low and high speed.

Which steering systems is the NAC-D autopilot computer compatible with?

The NAC-D autopilot computer is designed to be compatible with several popular steering systems. According to the documentation, it is compatible with:

Volvo®, Yamaha®, Optimus® (SEASTAR®), Yanmar®. It is important to note that for some of these systems, the tiller can only be actuated when the engine is running.

What are the essential steps for installing and commissioning the NAC-D autopilot computer?

Commissioning the NAC-D autopilot computer involves several critical steps to ensure proper operation and optimal performance:

The units must be mounted and secured in accordance with the specific installation instructions.The network must be powered and wired as per the provided wiring instructions.Required data sources must be selected via the autopilot control unit documentation.The boat must be configured by entering its characteristics (type, length, cruising speed, etc.).The autopilot control units must be configured and calibrated.The compass must be accurately calibrated.A sea trial must be conducted (manually or using the Autotune function) to fine-tune the autopilot's performance.

What is the warranty duration for the Navico NAC-D autopilot computer?

The Navico NAC-D autopilot computer comes with a standard 2-year warranty from the date of purchase. This warranty covers manufacturing and material defects under normal operating conditions.

With which steering systems or engines is the NAC-D autopilot computer compatible?

The NAC-D autopilot computer is designed to be compatible with several marine steering systems and engines. It supports electronic steering systems from brands such as:

Volvo®, Yamaha®, Optimus® (SEASTAR®), Yanmar®. Please note that for some of these systems, the engine may need to be running to turn the helm.