Rafstraumsmælir (CA) – 80 til 270 V CA

The BLUE SEA 8237-BSS AC digital voltmeter is a single-function instrument. It is specifically designed to measure and display alternating current (AC) voltage within a range of 80 to 270 V AC.

This AC digital voltmeter can measure AC voltages in a range from 80 V AC to 270 V AC.

No, the 8237-BSS model is a single-function voltmeter. It is dedicated solely to measuring AC voltage. For amperage, you would need an ammeter such as the 8238, and for frequency, a frequency meter like the 8239, both from the BLUE SEA series.

Monitoring voltage is crucial, especially when using a generator or shore power. Excessive voltage can damage equipment, while significant fluctuations may indicate voltage regulation or fuel supply issues. The 8237-BSS provides real-time data for proactive management of the electrical system.

No, the 8237-BSS voltmeter is a single-function instrument and does not have a Scan mode to select different parameters nor alarm functions. These features are reserved for the 8200 series multimeters, such as the 8247.

The 8237-BSS voltmeter display has three adjustable brightness levels. Pressing the button dims the display. Single-button models, such as the 8237-BSS, also feature a fourth standby mode where the display is off except for a single decimal point.

Yes, the voltmeter’s face is splash-proof and its PCBs are conformal-coated for enhanced corrosion resistance, making it suitable for protected marine environments.

The voltmeter must be installed in an environment safe for high-voltage electrical connections, ideally in an electrical panel. The terminals at the rear of the device must not be accessible to personnel. The location must be dry and protected. While the front is splash-proof and the circuits are coated for corrosion resistance, it is not designed for use in wet environments or for outdoor installation without additional protection.

The installation involves high-voltage connections. It is imperative to disconnect all AC sources (generators, inverters, shore power) before handling the wires. For marine and RV installations, ensure the shore power or park supply is disconnected and the DC power from inverters is disconnected. Connections must be made carefully and protected by fuses.

Yes, it is strongly recommended to hire a qualified electrician if you are not experienced and comfortable with AC device installation. Installation involves electrocution and fire hazards.

All wiring connections must be made in safe, dry cable runs with an appropriate cable tie. High-voltage connections must be carefully executed and protected by fuses in accordance with the manufacturer's recommendations.

No, although the front panel is splash-proof and the PCBs are coated for corrosion resistance, the 8237-BSS voltmeter is not intended for use in wet environments or for outdoor installation without additional protection.

When powered on, the voltmeter runs a self-test sequence that lights up all function LEDs before displaying the voltage reading.

The BLUE SEA 8237-BSS AC digital voltmeter is designed to measure AC voltages in the 80 to 270 V AC range, making it compatible with the 120V and 240V single-phase electrical systems commonly found in marine and RV applications.

Yes, monitoring voltage is critical when using a generator. The 8237-BSS voltmeter is ideal for monitoring the voltage supplied by marine generators to prevent equipment damage from excessive or fluctuating voltage.

Yes, the 8237-BSS voltmeter is compatible with shore power systems. It monitors input voltage to ensure it is within a safe and stable range, protecting onboard equipment.

No, the 8237-BSS is a single-function instrument. It is specifically designed to measure AC voltage and does not combine other functions such as amperage or frequency in a single device, unlike the 8200 series multimeters.

By providing real-time voltage data, the 8237-BSS voltmeter enables rapid identification of anomalies such as excessive voltages or significant fluctuations. This proactive monitoring helps prevent failures by allowing intervention before issues worsen or damage other equipment.

When powered on, the 8237-BSS voltmeter performs a self-test sequence. During this phase, all function LEDs briefly light up, indicating that the device is checking its internal components and preparing to operate correctly.

No, the 8237-BSS voltmeter is a voltage measuring device and does not require a current transformer (CT). Current transformers are typically used with ammeters or multimeters to measure current.