CHIRP hliðarsonarborð CPT-200 hitastigsskrá fyrir beina tengingu við CP200 (10m rafmagnskafli)

The Raymarine CPT-200 transducer is designed for side-scan sonar imaging (SideVision) and water temperature measurement. It allows you to visualize structures and fish on the sides of your vessel.

The CPT-200 transducer uses CHIRP (Compressed High-Intensity Radiated Pulse) technology for its side-scan imaging. This technology improves resolution and target separation for clearer images.

Yes, the Raymarine CPT-200 transducer includes a temperature sensor, enabling it to provide accurate surface water temperature data.

The CPT-200 is a transom-mount transducer. It is designed to be installed on the transom of your boat.

The CPT-200 depth sounder comes with a built-in 10-metre cable for direct connection to a compatible sounder module.

Yes, thanks to its SideVision lateral scanning imaging, the CPT-200 transducer is highly effective at detecting fish schools, submerged structures, and wrecks to the sides of the boat, which is useful for fishing.

The CPT-200 transducer specializes in side-scanning imaging (SideVision), showing what is located alongside the boat. A DownVision transducer (such as the CPT-100) is designed for vertical imaging, showing what is directly beneath the boat.

SideVision side-scanning sonar allows you to scan large areas on either side of your boat. It is ideal for locating structures, wrecks, rocks, or fish schools that may not be directly beneath the vessel.

No, the CPT-200 transducer is not a traditional 2D depth sounder. It is a SideVision side-scan imaging transducer that complements the capabilities of a traditional depth sounder or a DownVision transducer by providing detailed lateral imagery.

The CHIRP technology used by the CPT-200 emits a frequency sweep rather than a single frequency. This provides better resolution, superior image clarity, and improved target separation, making underwater details more distinct.

The CPT-200 transducer is designed to work exclusively with the Raymarine CP200 fishfinder module. It connects directly to this module.

No, the CPT-200 transducer cannot be connected directly to a Raymarine multifunction display. It requires the CP200 sounder module to process the data, and it is the CP200 that then connects to the display.

Yes, the CPT-200 transducer is compatible with Raymarine Axiom navigation systems, but only when connected to the CP200 sounder module.

Yes, the CPT-200 transducer is compatible with Raymarine eS and gS Series displays, provided it is connected to the CP200 sounder module.

No, the CPT-200 transducer is specifically designed for the Raymarine system and is only compatible with the Raymarine CP200 fishfinder module. It will not work with modules from other brands.

Yes, the CPT-200 transducer is often used as a complement to a DownVision system (such as the CP100) or to traditional fishfinders, adding side-scan imaging capability to your equipment.

The recommended mounting for the CPT-200 transducer is on the transom of your boat. This mounting type is relatively straightforward and suitable for most recreational vessels.

Yes, a 10-meter cable is generally sufficient for a transom installation, allowing the transducer to connect to the CP200 module located at the console or in an electronics compartment on most recreational boats.

Yes, installing a transom-mounted transducer like the CPT-200 typically requires drilling the transom to securely attach the transducer mount and route the cable inside the boat.

To optimize performance, the CPT-200 depth sounder must be installed in an area where water flow is as smooth as possible and free of turbulence (air bubbles), typically on the transom, away from propellers, keels, and other appendages that could disrupt the signal.