5 ceļu savienojošā stieņa 400 A drošinātāju turētājam

The 5-way 400A BEP tie bar is an electrical component designed to interconnect up to five adjacent DC products, such as fuse holders, in marine installations and recreational vehicles. It is specifically optimized for BEP's Pro Installer system, enabling organized wiring and space savings.

This link bar is made of high-purity tinned copper. This material choice ensures maximum electrical conductivity and excellent corrosion resistance, which is essential for marine environments.

The busbar can handle a continuous current of 400 amperes across all five positions. If two adjacent positions are linked, the continuous current capacity can reach 650 amperes, allowing for handling higher electrical loads.

You can connect up to five adjacent DC devices to this bus link, thanks to its five separate channels.

The main advantages include significant wiring optimization, substantial space savings in installation, maximum electrical conductivity thanks to tinned copper, and increased resistance to corrosion, extending the lifespan of the installation.

The overall dimensions of the tiller extension are 8.8 inches in length by 1 inch in width. These compact dimensions promote streamlined and optimized installations.

Yes, absolutely. It is made from high-purity tinned copper, a material specifically chosen for its strong corrosion resistance, making it ideal for demanding marine environments.

It simplifies wiring by consolidating connections from multiple electrical components, such as fuse holders, into a single point. This reduces the need for long and complex individual cables, thereby minimizing clutter and making wire management easier.

The spacing between the mounting holes or connection studs of this link bar is 2 inches.

This link bar is primarily designed for DC electrical installations in marine applications and recreational vehicles, where reliability and space optimization are critical.

The link bar is typically installed by securing it directly to the rear of adjacent components, such as fuse holders or battery switches, using 3/8-inch connection studs. Ensure all connections are clean and tightened properly.

For installation, you will need appropriate tools to tighten nuts on 3/8-inch studs, such as a socket wrench or an adjustable wrench of the correct size. It is also recommended to use a screwdriver if the components to be connected require additional fasteners.

The tie bar is designed for 3/8-inch studs, which is a standard size for many high-current electrical connections in marine applications.

Yes, the tie bar design allows some flexibility in mounting orientation as long as it can be securely fastened to adjacent components and cable access is maintained. However, it is always best to follow the manufacturer's specific recommendations for optimal installation.

Yes, it is very important to tighten all electrical connections to the torque recommended by the component manufacturer (fuse holders, etc.) to ensure good electrical conductivity and prevent loosening due to vibration. Over-tightening or under-tightening can lead to performance or safety issues.

This busbar is specifically designed to integrate with BEP's Pro Installer system. It is therefore compatible with fuse blocks and other products in the Pro Installer range that use 3/8-inch studs with a 2-inch spacing.

Although it is optimized for the BEP Pro Installer system, this bar can be used as a high-current bus link in various applications. It is compatible with any electrical component featuring 3/8-inch studs and a 2-inch spacing between connection points.

Yes, this link bar is designed to handle direct currents and is compatible with 12V, 24V and other common DC voltages in marine and recreational vehicle applications, provided the current capacity of 400A (or 650A) is not exceeded.

Modifying or cutting the tiller extension is not recommended. Any alteration could compromise its structural integrity, electrical conductivity, and rated current capacity, potentially voiding its performance and safety.

Yes, in addition to marine applications, this link bar is fully suitable for use in recreational vehicles (campervans, caravans) or other automotive applications requiring reliable DC power distribution and space savings, provided the current and stud size specifications are met.