Fiksēta antennes pamatne MB-BA197

The MB-BA197 fixed antenna base is a rigid, one-piece mounting bracket specifically designed for permanent and secure installation of maritime communication antennas. It is distributed by Icom and ensures stable anchoring on flat surfaces of the vessel.

The main characteristic of the MB-BA197 pedestal mount is its fixed, one-piece design with no moving parts. Unlike adjustable or tiltable ball-joint mounts, it eliminates any risk of loosening due to vibrations or marine stresses, providing absolute reliability and optimal compactness.

This transom mount is specifically designed for boats with perfectly horizontal mounting surfaces. Its design ensures superior mechanical resistance to vibrations, impacts, and extreme weather conditions encountered at sea, making it ideal for rigorous marine use.

The long-term reliability of the fixed MB-BA197 base is ensured by several aspects of its design and construction:

One-piece design: This integrated structure guarantees superior mechanical strength, capable of effectively withstanding vibrations, shocks, and extreme weather conditions typical of the marine environment.No moving parts: Unlike adjustable gimbal mounts, the MB-BA197 base has no moving parts. This eliminates any risk of loosening of the clamping handle, a potential failure point under the effects of marine stresses or engine vibrations.Permanent and secure anchoring: Its installation by direct screwing onto the deck ensures permanent and highly secure anchoring, contributing to the overall stability of the antenna.Maintaining vertical alignment: It keeps the antenna in a strict vertical alignment, which is essential to preserve the transmission and reception performance of signals over time.These combined features prioritize robustness and stability, essential for reliable and durable use at sea.

Fixed shaft brackets offer several advantages. They provide absolute reliability by eliminating any risk of loosening of the clamping handle due to marine stresses or engine vibrations. Their one-piece design ensures superior mechanical strength and greater compactness, prioritizing stability and durability.

The fixed MB-BA197 mount is designed to enhance the performance and reliability of your marine communication system in several ways:

Strict vertical alignment: It ensures the antenna is held in a precise vertical axis. This stability is critical for optimal VHF, ASN, and AIS signal transmission and reception, particularly for fixed stations operating at 25 W.Mechanical resistance: Its one-piece design provides exceptional robustness. It withstands vibrations, impacts, and extreme weather conditions at sea, protecting the antenna's integrity.Reliability: Unlike adjustable mounts, the absence of moving parts eliminates the risk of loosening due to marine stresses or engine vibrations. This guarantees permanent and secure antenna mounting, reducing failure or signal loss risks.Secure anchoring: Direct screwing onto flat surfaces of the vessel (deck, console, helm roof) ensures a permanent and reliable anchor point, essential for installation durability and consistent communications.

Yes, the MB-BA197 fixed antenna base is an accessory distributed by Icom, a brand recognized in the field of marine communication equipment.

The MB-BA197 fixed base is installed by direct screwing onto a flat surface of the boat. This method ensures permanent and secure anchoring.

The transom mount can be installed on various flat surfaces of the boat, such as the deck, console, or roof of the bridge, provided these surfaces are perfectly level.

Yes, it is imperative to install the MB-BA197 mount on a perfectly horizontal surface. Its fixed design does not allow adjusting the antenna angle. For sloped surfaces, a swivel mount would be required.

When installing the MB-BA197 fixed deck socket, the coaxial cable is routed and secured via its design for direct screwing onto a flat surface of the vessel, such as the deck. The coaxial cable, with an impedance of 50 Ω, is typically routed through the deck. Once firmly screwed in place, the socket helps hold the cable in position and protects its entry point, ensuring a stable and reliable connection to communication equipment or an AIS transponder.

Yes, the MB-BA197 base is designed for permanent installation. Its direct screwing fixation and robust design ensure durable and secure anchoring of the antenna on the vessel.

The MB-BA197 fixed antenna base is designed to be installed by direct screwing onto a flat and horizontal surface of the vessel, such as the deck, console, or helm roof. For correct and secure installation, you will need fasteners suitable for the material of your mounting surface (for example, stainless steel screws for the marine environment).

It is essential to select screws with the appropriate length and diameter to ensure optimal mechanical strength. Additionally, it is strongly recommended to use a marine-grade sealant at the mounting points to ensure waterproofing and protect against water infiltration.

The MB-BA197 base is designed to accommodate whip antennas operating on standard maritime frequency bands. It is compatible with maritime communication antennas requiring a fixed and vertical mount.

This base is designed to support antenna whips operating on standard maritime frequency bands, such as those used for VHF transmission and reception (156.025 – 161.425 MHz), ASN (156.525 MHz), or AIS.

Yes, the MB-BA197 base is designed to accommodate the antenna whips required for VHF communications, ASN systems (Digital Selective Calling) and AIS transponders (Automatic Identification System).

The MB-BA197 fixed antenna base is designed to simplify the routing and installation of an antenna that uses a coaxial cable with an impedance of 50 Ω. This impedance is the standard for VHF, ASN, and AIS maritime communication systems, ensuring optimal compatibility with most communication equipment and AIS transponders.

The fixed MB-BA197 base is designed to secure the passage of the coaxial cable (with a 50 Ω impedance) from an antenna to various marine communication devices. It is compatible with antennas intended for transmitting and receiving VHF, DSC (Digital Selective Calling), and AIS (Automatic Identification System) signals.

This means an antenna mounted on this base can be connected to:

Fixed VHF stations, such as the Icom IC-M510E EVO, for voice communications and DSC functions.

Class B AIS transponders, such as the MA-510TR, for receiving and transmitting ship identification and position data.

More generally, any marine communication equipment requiring an antenna for standard maritime frequency bands (156.025–161.425 MHz for transmission and 156.500–162.000 MHz for reception).

The base itself provides mechanical support and cable routing, while the antenna and connected devices handle the specific signals.

The fixed base MB-BA197 is designed to accept standard marine antenna whips. It features a standard 1 inch - 14 TPI (Threads Per Inch) thread. This thread type is universally used in the marine industry, ensuring mechanical compatibility with the vast majority of VHF, ASN, and AIS antennas available on the market.

No, the MB-BA197 base is a fixed model that holds the antenna in a strict vertical axis. If your installation requires angle adjustment on a sloped surface, it is recommended to opt for a 4-axis articulated ball joint from the same range.