Attālinātais mikrofons HM-195GW

The HM-195GW (Command Mic™) is a remote control interface. It allows you to operate your fixed Icom VHF radio from a secondary navigation station, such as a cockpit or flybridge, by replicating all functions of the main unit.

Yes, absolutely. The HM-195GW integration gives you full access to Digital Selective Calling (ASN/DSC) functions, allowing you to initiate a distress alert directly from your secondary helm station.

Yes, its construction is ruggedized for the marine environment. Its waterproof housing provides effective protection against spray and harsh weather, allowing exposed outdoor installation (such as on a flybridge) without risk of damage.

Yes, the HM-195GW turns your network into a full intercom system. You can communicate directly between the remote microphone and the main VHF station, making exchanges with other crew members easier.

The IC-M410BB modular system allows connection of up to two Command Mic™ stations simultaneously to manage onboard communications.

The microphone features an instant-access button for channel 16. This ensures optimal and immediate responsiveness in case of an emergency at sea.

Yes, the HM-195GW features a backlit display that ensures perfect data readability, whether in bright sunlight or during nighttime sailing.

No, the remote microphone is powered directly by the main VHF radio via its connection cable. No additional power supply is required during installation.

No, the HM-195GW is not a standalone radio. It is a remote control interface that must be connected to a compatible Icom VHF radio to function.

No, the Command Mic™ HM-195GW uses a proprietary communication protocol. It is exclusively compatible with Icom-brand VHF radios listed in its specifications.

No, one of the major advantages of the HM-195GW is that it faithfully reproduces the ergonomics, menus, and display of the main unit. You do not need to learn a new interface.

The microphone connects to the main VHF using a dedicated extension cable. This cable plugs into the specific port located at the rear of the radio or on the black box.

Yes, the microphone can be disconnected from its base. It is also recommended to replace the watertight cap on the deck socket connector when the handset is unplugged, to protect the contacts from marine corrosion.

Yes, it is not just a microphone but a complete handset. It includes a speaker for clear reception of VHF communications and intercom exchanges.

Due to its waterproofing, the most common installation locations are:

The cockpitExterior flybridgeA secondary helm stationThe chart table (if the VHF is installed elsewhere)

Absolutely. You have full control over the master VHF. You can change channels, adjust volume, modify the squelch level, and navigate all menus directly from the HM-195GW.

Yes, consistent with Icom’s reliability standard, this microphone is built to withstand the most demanding conditions. Its rugged housing and waterproofing ensure optimal operation even under heavy water spray or spray.