ICOM MB-132 iebūvēšanas komplekts

The Icom MB-132 flush-mount kit is a mounting accessory designed for surface-mount installation of Icom marine VHF stations on a dashboard or bulkhead. It allows the radio to be integrated directly into the helm console, providing a clean finish.

The MB-132 kit is used to integrate your Icom fixed VHF into your helm console in a clean and functional way. It replaces the traditional bracket mount, providing a flush finish and reducing the unit's footprint at the helm.

Using the MB-132 kit provides several advantages:

A flush, aesthetic integration into the console.

Reduced physical footprint of the VHF at the helm.

Increased protection of the radio chassis against mechanical shocks or accidental snags.

Maintenance of the radio’s front-panel waterproofing standards.

Yes, the MB-132 flush-mount kit is an accessory from the Icom brand, designed specifically for their marine VHF radios.

No, the MB-132 flush-mount kit is a separately sold accessory. It is designed for use with compatible fixed Icom VHF radios, which are not included.

The MB-132 flush-mounting kit is strictly compatible with the following Icom fixed VHF radio models:

IC-M323IC-M423GEIC-M506

No, the MB-132 kit is not compatible with the IC-M330GE model. The IC-M330GE uses a different flush-mount kit, the MBF-5.

No, the MB-132 kit is not compatible with the IC-M510E model. The IC-M510E requires a dedicated flush-mount kit, the MBF-7.

No, the MB-132 flush-mount kit is designed exclusively for Icom-compatible VHF radios. Its threading and mounting brackets are specific to these units, ensuring optimal structural rigidity.

No, the MB-132 kit is not compatible with all Icom fixed VHF radios. It is specifically designed for certain compact models, such as the IC-M323, IC-M423GE, and IC-M506. It is important to verify the compatibility of your VHF model before purchasing.

The MB-132 kit is secured using a clamping system operated from the rear of the console. This mechanism ensures even pressure on the radio's front panel against the cutout wall, providing a solid hold.

Yes, installing the MB-132 kit requires cutting a precise opening in the dashboard or partition of your console to flush-mount the VHF and the kit.

The available information does not specify whether a cutting template is included. It is recommended to refer to the installation manual of your compatible Icom VHF for the exact dimensions of the required cutout.

Installing the MB-132 flush-mount kit for your Icom VHF radio involves several key steps to ensure a secure and flush integration:

Surface preparation: The first step is to cut a precise opening in your boat’s dashboard or bulkhead. This cutout must match the exact dimensions of the compatible Icom VHF radio’s housing and the MB-132 kit for a perfect fit.

VHF insertion: Once the cutout is made, the VHF radio is inserted from the front into the prepared opening.

Secure fastening: The MB-132 kit is then positioned and used to tighten and firmly secure the VHF from the rear of the console. This rear-mounted clamping mechanism ensures even pressure on the radio’s front panel, keeping it flush with the dashboard surface and maintaining the radio’s front-panel waterproofing standards (up to IPX8 depending on the installed VHF model), thus protecting the helm area from water or spray ingress.

This mounting method provides an integrated and aesthetic finish, distinct from standard bracket mounting.

While specific tools are not listed, installing a flush-mount kit typically requires measuring tools (tape measure, pencil), cutting tools (jigsaw or rotary tool), and fastening tools (screwdriver).

Yes, the MB-132 kit is designed to secure compatible Icom VHF radios, ensuring optimal structural rigidity against marine vibrations, thereby protecting your VHF.

The MB-132 kit offers a flush or surface-mounted installation. This means the VHF is integrated directly into the dashboard or bulkhead surface, leaving only its front panel visible.