UHF relejs IF-FR6100D220VM

The UHF relay IF-FR6100D220VM is a professional radio repeater designed to extend radio communication coverage. It supports both digital and analog modes, enabling a gradual transition to digital while optimizing radio spectrum usage.

The IF-FR6100D220VM relay has a transmit power of 2 W.

The dPMR Mode 3 digital trunking system, supported by the IF-FR6100D220VM repeater, operates with a centralized control channel. When a user requests a call, the trunking controller automatically allocates one of the available traffic channels to establish the communication.

The control channel is separate from the traffic channels and continuously transmits a control signal. This system is designed to manage a large number of users and congested traffic channels by allocating a traffic channel for the entire duration of the call, enabling rapid response in a series of communications.

Yes, the IF-FR6100D220VM relay supports mixed-mode communication, allowing it to receive both analog and digital signals on the same channel. This facilitates gradual migration to digital systems.

The IF-FR6100D220VM relay uses Icom's IDAS™ system, based on the open dPMR (Digital Private Mobile Radio) ETSI standard. It integrates the AMBE+2™ codec for improved audio quality.

The relay uses the AMBE+2™ codec, which delivers clear and dynamic communications, even in noisy environments, thanks to its digital filter. The dPMR digital technology also reduces background noise and improves audio intelligibility at the edge of the coverage area.

Yes, the IDAS™ system integrated into the relay provides advanced digital scrambling (scrambler) with a 15-bit code and 32,000 combinations, ensuring conversation privacy.

The IDAS system allows various types of calls, including:

Individual callsGroup callsCall group callsEmergency callsBroadcast callsCalls to all users

Yes, the IDAS system supports the transmission of data and status messages. It can send up to 100 programmable status messages and can also transmit GPS position if the terminals are equipped with a GPS receiver.

Yes, the IDAS system doubles the capacity of current 12.5 kHz spaced bands, thus optimizing radio resource usage and preventing spectrum saturation.

The relay supports an analog channel spacing of 12.5 kHz and a digital channel spacing of 6.25 kHz.

Yes, the 'lone worker' (PTI) function is available with the IDAS system, including automatic emergency calls, in digital and analog modes.

The IF-FR6100D220VM relay is designed in a 19-inch rack format, 2U high.

Yes, the relay can be integrated into an IP network. An optional UC-FR5000 card is required for IP connectivity. In dPMR Mode 2 systems, up to 16 repeater sites can be interconnected via an IP network.

The IF-FR6100D220VM relay has an accessory connector of type D-sub 25 pins.

Yes, for conventional PMR Mode 2 systems, a web-based system administration is available for software updates and online configuration.

Yes, thanks to its mixed digital/analog mode, the relay can coexist with existing analog radio systems, allowing flexible migration to digital. It is also compatible with the IDAS™ system.

Yes, the dPMR system supported by the relay includes Mode 1 (peer-to-peer communications), Mode 2 (conventional repeater mode), and Mode 3 (digital trunking).

Yes, the relay can be interconnected with IP phones, analog radios, and advanced IP radio systems using the RoIP gateway VE-PG3.

Yes, thanks to the FDMA (Frequency Division Multiple Access) technology used by the IDAS system, direct communications between terminals (peer-to-peer) are possible in narrowband mode, providing two simultaneous communications on a 12.5 kHz channel with or without a repeater.