Type 0.5 Autopilot hydraulic pump for 12 volt systems

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 9%

Raymarine

E12139

Črpalka z dvojno smerjo T0.5 - 12V

La pompe réversible T0.5 - 12V Raymarine (E12139) est l'option la plus compacte de la gamme de pompes hydrauliques Raymarine, idéale pour les systèmes de pilotage automatique et vérins de 50 à 110 cc. Conçue pour une intégration fiable avec les ordinateurs de cours SPX ou les unités ACU Evolution, elle bénéficie d'une protection IP67 pour les environnements moteur. Le produit inclut la pompe hydraulique, trois joints 1/4 in BSP en caoutchouc/métal, et trois adaptateurs 1/4 in BSP vers 1/4 in NPT (si nécessaires).

Public priceGet pro pricing

880,85€

880,85€ ~~978,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Maksimalna poraba električne energije	108 W
Tipična poraba električne energije	108 W
Delovna napetost	12 V
Delovna temperatura	-25°C à +55°C
Priporočena vrednost varovalke	15 A
Širina izdelka	103 mm
Višina izdelka	89 mm
Globina izdelka	203 mm
IP razred	IP67
Tip montaže	Fixation boulonnée
Certifikati	CE, EN60945, IEC 60529 IP67
Displacement	50-110 cc
Vrsta pogonske enote	Pompe hydraulique réversible
Vključena montažna vijak	Non
Orientacija montaže	Toutes orientations, à condition que le moteur ne soit pas sous le corps de la pompe
Maksimalni tlak	55 bar (800 psi)
Vgrajen senzor kota krmila	Non
Izklopljivo	Non

Detailed description

Namenjena sistemom avtopilota Raymarine, črpalka z dvojno smerjo T0.5 - 12V Raymarine (E12139) je hidravlična enota, ki je primerna za plovila, opremljena z obstoječim hidravličnim krmiljenjem ali mehanskim sistemom z sekundarnim cilindrom. Kot najkompaktnija v seriji hidravličnih črpalk Raymarine je idealna za cilindre z zmogljivostjo od 50 do 110 cc (3,1 do 6,7 in³).

Zmogljivost in integracija

Ta črpalka tipa 0.5 dosega vršni pretok 600 cc/min (36,6 in³/min) brez obremenitve, z največjim prekinjalnim tlakom 55 bar (800 psi) pri 12 V. Tipična poraba je 9 A pri 12 V pod 55 bar. Motor črpalke, napajan z 12 V DC, ima zaščito IP67 in ga je mogoče odstraniti, ne da bi ogrozili neprepustnost hidravličnega sistema. Vključen je pilotiran protitlačni ventil, ki preprečuje vračanje skozi ročno krmiljenje, in je združljiv z uravnoteženimi ali neuravnoteženimi cilindri ter sistemi s tlačnim rezervoarjem.

Primerjava in fizikalne specifikacije

Črpalka T0.5 (E12139) se razlikuje od višjih modelov serije Raymarine, kot so črpalke tipa 1 (M81120/M81119), tipa 2 (M81121/M81123) in tipa 3 (M81122/M81124), po zmogljivosti cilindra in manjšem pretoku, zaradi česar je namenjena predvsem za manjše in srednje velike sisteme. Medtem ko T0.5 obvlada do 110 cc, tip 1 dosega 230 cc, tip 2 350 cc in tip 3 500 cc. Njene kompaktne dimenzije (A: 58,4 mm, B: 203 mm) in BSPP priključki 1/4 palca olajšajo namestitev pod palubo, ločeno od virov toplote in vibracij. Usklajena je z normami CE, vključno z direktivo EMC 2004/108/EC in standardom EN60945:2002.

Documentation

Type	Nom
	EN - Notice d'installation - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis of the Raymarine T0.5 hydraulic pump for autopilot »

The Raymarine T0.5 reversible hydraulic pump - 12V (E12139) is a critical component for autopilot systems on small to medium-sized vessels. Its specification for cylinders ranging from 50 to 110 cc positions it as Raymarine's entry-level solution for hydraulic steering, targeting sailboats or small motor yachts where the cylinder volume falls within this range. It is particularly suitable when installation space is limited, thanks to its compact dimensions.

Integrating this pump into an existing system requires careful attention to hydraulic circuit cleanliness to ensure proper operation of the integrated check valves. Installation must be done below deck, away from excessive heat sources or vibrations, to ensure system longevity. Its 12V design and 9A consumption at 55 bar make it compatible with the standard electrical architectures of most recreational boaters, without excessively draining service batteries, unlike larger-capacity pumps such as the Type 2 or Type 3, which can draw 24A or 34A at 12V.

Although the manual recommends installation by a certified Raymarine service representative, for an experienced marine electronics and hydraulics installer, implementing this pump is straightforward, provided the electrical connection directives to an Evolution ACU (Actuator Control Unit) or SPX course computer are strictly followed. It is critical to note that this pump is not suitable for large-capacity hydraulic cylinders, for which the T1, T2, or T3 models would be more appropriate.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Črpalka z dvojno smerjo T0.5 - 12V

880,85€

880,85€ ~~978,00€~~

Frequently asked questions

Need help? Contact us

For which type of steering system is this pump designed?

The Raymarine T0.5 reversible pump is primarily designed for vessels equipped with an existing hydraulic steering system. It can also be used on vessels with a mechanical steering system, provided it is paired with a secondary steering cylinder.

What is the maximum hydraulic cylinder capacity this pump can handle?

This T0.5 hydraulic pump is suitable for cylinders with a capacity between 50 and 110 cc (3.1 to 6.7 in³).

What are the key performance specs of the T0.5 reversible pump in terms of flow rate and pressure?

The T0.5 reversible pump delivers the following performance at 12 V:

Peak flow rate (no load): 600 cc/min (36.6 in³/min)Maximum intermittent pressure: 55 bar (800 psi)Typical current draw: 9 A at 55 bar

Where should I install the Raymarine T0.5 pump on my boat?

The T0.5 pump is designed for installation below deck only. For optimal performance and to prevent damage, it is recommended to install it:

On a solid structure to minimize vibrations.Away from heat sources, excessive vibrations, and fumes.Away from confined areas containing flammable materials.Preferably above the waterline.Absolute cleanliness is essential during installation of hydraulic systems to prevent dirt particles from affecting the operation of check valves.

Is this pump compatible with balanced or unbalanced hydraulic rams?

Yes, the Raymarine T0.5 reversible pump is compatible with balanced and unbalanced hydraulic rams. It can also be used with pressurized reservoir systems.

Is the pump motor waterproof and can it be easily removed?

Yes, the pump motor is rated IP67, ensuring protection against temporary immersion in water. It can be removed from the pump without compromising the hydraulic system's watertight integrity or causing fluid leakage.

What are the hydraulic connections for the T0.5 pump?

All hydraulic ports on the reversible Raymarine T0.5 pump are 1/4 inch BSPP (parallel thread) type.

Which Raymarine autopilot systems is this pump compatible with?

The Raymarine T0.5 reversible pump is designed to be integrated with Raymarine autopilot systems. It is compatible with the SPX course computer or the Evolution Actuator Control Unit (ACU).