Câble de mât 50 mètres pour capteur RSW Smart Wind

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 9%

Raymarine

R70945

Kabel za jambor 50 metrov za senzor RSW Smart Wind

Le câble de mât Raymarine R70945 de 50 mètres est un accessoire indispensable conçu pour connecter le capteur de vent RSW Smart Wind à sa passerelle ou au réseau SeaTalk NG. Ce composant assure une transmission de données fiable et sans perte sur des installations de grande longueur. Il s'agit d'une pièce de rechange ou d'installation pour le système de vent intelligent RSW de Raymarine, inclus uniquement le câble lui-même.

Public priceGet pro pricing

254,66€

254,66€ ~~282,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Število vodnikov	5.0
Barva	Noir
Maksimalna napetost	30.0
Oklop	Blindé
Upogljivost	Flexible
Vrsta toka	DC
Material vodnika	Cuivre étamé
Certifikati	CE
Končanje vodila	Étamé
Dolžina kabla	50.0
Kompatibilna mreža	SeaTalk NG, NMEA 2000
Predlitjevni konektorji	Oui (côté capteur), Non (côté passerelle)
Lokacija nameščenega izdelka	Mât
Uporaba kabla	Liaison capteur de vent, Données et alimentation
Delovna temperatura	-25°C à +55°C
Temperatura shranjevanja	-30°C à +70°C
Minimalni polmer upogiba	25 mm
Vrsta konektorja	Propriétaire (côté capteur), Bornier à vis (côté passerelle)
Odpornost na UV sevanje	Élevée
Tip izdelka	Câble de mât

Detailed description

Namenjen je predvsem za vgradnjo navigacijskih sistemov Raymarine. Kabel R70945 dolžine 50 metrov je ključna komponenta za senzor za veter RSW Smart Wind. Omogoča povezavo med senzorjem vetra na vrhu jambora in prehodno enoto (gateway) ali omrežjem SeaTalk NG ladje, kar zagotavlja natančen in zanesljiv prenos podatkov na večje razdalje.

Vgradnja in delovanje sistema RSW Smart Wind

Sistem RSW Smart Wind od Raymarine, tako kot rešitve za veter pri B&G z senzorji H5000 ali Garmin z vetrnico/anemometrom GWS 10/20, se odlikuje po integriranem pristopu k merjenju vetra. Kabel R70945 je zasnovan za vgradnjo na jamborih večjih dimenzij, kar omogoča opremljanje širokega razpona jadrnic, od križark do regatnih enot. Njegova dolžina 50 metrov zagotavlja pomembno fleksibilnost pri vgradnji, saj odpada potreba po vmesnih spojih, ki bi lahko povzročili izgubo signala ali točke odpovedi. Ta značilnost je ključna za ohranjanje celovitosti podatkov o vetru, vključno z kotom in hitrostjo, kar je bistveno za avtopilota in optimizacijo jadrskih zmogljivosti.

Tehnična zasnova za morsko okolje

Ta kabel je pasiven, a ključni element sistema. Zasnovan je tako, da odporen na zahteve morskega okolja, vključno z izpostavljenostjo UV sevanju, slani vodi in temperaturnim nihanjem. Kakovost kabla je ključna za preprečevanje elektromagnetnih motenj in zagotavljanje stabilne komunikacije med senzorjem vetra in prehodno enoto RSW, ki nato podatke preko omrežja NMEA 2000 (SeaTalk NG pri Raymarine) distribuira do večfunkcijskih zaslonov Axiom, Element ali instrumentov i70/i70s. Izbira posvečenega kabla, kot je R70945, namesto splošne rešitve, zagotavlja združljivost in delovanje senzorja vetra Smart Wind od Raymarine, kar prispeva k dolgoživosti in natančnosti celotnega navigacijskega sistema.

Documentation

Type	Nom
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Gabarit de montage - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Gabarit de montage - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Declaration de conformite - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Declaration de conformite - Câble de mât 50 mètres pour capteur RSW Smart Wind

Expert review

Pol CONIN

Odgovorni digitalni delavec

« Raymarine R70945 mast cable: backbone of the RSW Smart Wind sensor »

Integrating a high-performance masthead wind sensor like the Raymarine RSW Smart Wind depends directly on the quality and length of the cabling. The R70945 mast cable, with its 50 meters, is designed to meet the requirements of installations on medium to large sailboats. Its length allows direct routing from the sensor to the mast base or navigation console, reducing the risks of multiple connections and signal loss.

During installation, it is essential to follow proper cable routing practices inside the mast, including provision for drip loops and protection against abrasion. Although the cable itself is a passive component, its resistance to mechanical and environmental stresses (UV, moisture, salt) is critical for system longevity. Using this proprietary cable ensures electrical compatibility and data fidelity, avoiding interference issues or signal degradation that could occur with unspecified cables.

This model is essential for any new installation or replacement of the RSW Smart Wind sensor, particularly on boats where cable routing is long or complex. It is an investment in the long-term reliability of your wind data, a fundamental parameter for safety and performance at sea.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Kabel za jambor 50 metrov za senzor RSW Smart Wind

254,66€

254,66€ ~~282,00€~~

Frequently asked questions

Need help? Contact us

What is the purpose of this 50-meter Raymarine mast cable?

This cable is specifically designed to connect the Raymarine RSW Smart Wind intelligent wind sensor. It provides the link between the wind sensor located at the masthead and the bridge unit (gateway) or the vessel's SeaTalk NG network, ensuring accurate and reliable data transmission over long distances.

Which Raymarine wind sensor is this cable compatible with?

This cable is exclusively compatible with the Raymarine RSW Smart Wind wired intelligent wind sensor. It is an essential component for integrating this specific system.

What is the exact length of this cable?

This mast cable is 50 meters long. This length is suitable for installations on tall masts, providing notable installation flexibility and helping to avoid intermediate splices.

How does this cable connect to the navigation system?

The cable connects the RSW Smart Wind wind sensor to the RSW gateway unit or directly to the vessel's SeaTalk NG network. The gateway then distributes the data via the NMEA 2000 network (SeaTalk NG on Raymarine systems) to compatible multifunction displays and instruments.

Is this cable compatible with Raymarine's SeaTalk NG network?

Yes, this cable is a key component of the RSW Smart Wind system, which is designed to integrate with Raymarine's SeaTalk NG network. It enables the transmission of wind sensor data to this network for display on your instruments.

Are there any recommendations for routing the cable inside the mast?

Yes, during installation it is important to follow general marine wiring guidelines. This includes respecting cable bend radii, ensuring strain relief, and creating a drip loop for mast cables to prevent water ingress. Careful routing helps maintain signal integrity.

What is the resistance of this cable to marine conditions?

This cable is specifically designed for the marine environment. It is manufactured to withstand stresses such as UV exposure, saltwater, and temperature variations, ensuring durability and stable, reliable communication.

Can I cut this cable if 50 meters is too long for my installation?

Yes, the Raymarine RSW Smart Wind wind transducer installation instructions state that the cable can be cut to the desired length and connected to the bridge. It is critical to follow Raymarine's provided instructions to ensure a correct and reliable connection after cutting.