Sonde sondeur traversante ou à coller 50mm

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 8%

Raymarine

T905

Sonda sondeja – prečna ali lepljena 50 mm

Conçu pour intégrer les données de vos sondes de profondeur, vitesse et température, l'émetteur de coque Raymarine T905 (SKU T905) assure une connexion fiable au système de bord. Compatible avec une alimentation 12/24Vdc, il est destiné à une installation verticale dans un environnement ventilé, à l'abri de l'eau. Le kit inclut les vis auto-foreuses nécessaires à la fixation.

Public priceGet pro pricing

148,27€

148,27€ ~~162,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Podprte sonar tehnologije	Sondeur analogique (profondeur, vitesse, température)
Delovna napetost	12/24 Vdc
Tip konektorja za sonar	Fils nus / Bornier à vis
Širina izdelka	52.5 mm
Višina izdelka	90 mm
Globina izdelka	42.5 mm
IP razred	Non applicable (doit être monté au-dessus de la ligne de flottaison)
Združljivost z vodilo	Analogique
Brezžična povezanost	Non
Tip montaže	Montage mural / Vertical
Vgrajen senzor hitrosti	Non
Vgrajen senzor temperature	Non

Detailed description

Namenjen je sistemom za pomorsko navigacijo, oddajnik na trnu Raymarine T905 upravlja z prenosom podatkov iz vaših sond za globino, hitrost in temperaturo. Ta modul je ključen za centralizacijo informacij iz žičnih pretvornikov proti instrumentaciji na krovu, kar zagotavlja rešitev za integracijo različnih konfiguracij senzorjev.

Namestitev in povezanost T905

Namestitev oddajnika T905 zahteva vertikalno nameščanje vsaj 50 cm nad vodno črto, v prostoru z dobro ventilacijo in brez neposrednega stika z vodo. Ne sme se namestiti v vodotesno pregrado. Napaja se preko vira 12/24Vdc in ga je mogoče napajati tudi s pomočjo sončnega panela Raymarine. Povezava kablov pretvornikov se izvaja po natančnem kodiranju barv, z navodili za Triducers (masa mora biti povezana na vtičnik globine) in za senzorje hitrosti brez senzorja temperature (povezava med rjavim in belim vodnikom).

Integracija podatkov iz sond

T905 omogoča združevanje signalov iz ločenih sond (globina, hitrost, temperatura) v eno točko. Za zagotovitev zanesljivosti povezav je potrebno nanesti silikonsko maščobo na kontakte. Pokrov ohišja zagotavlja držanje in zaščito zunanjih plaščev kablov. Ta tip oddajnika se pogosto uporablja v sistemih, kjer je prednost dana fleksibilnosti integracije obstoječih sond pred uporabo "vse-v- enem" pretvornikov ali neposrednih sistemov NMEA 2000, kot jih lahko vidimo na novejših izdelkih iz serije Axiom pri Raymarine ali drugih blagovnih znamk, kot so Garmin ali B&G.

Documentation

Type	Nom
	EN - Gabarit de montage - Sonde sondeur traversante ou à coller 50mm
	EN - Notice d'installation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm
	EN - Manuel d'utilisation - Sonde sondeur traversante ou à coller 50mm

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Wired transducer integration via Raymarine T905 hull-mounted transducer »

The Raymarine T905 hull transmitter is a critical component for integrating existing or specific wired transducers into a boat instrumentation network. Its practical value lies in its ability to bridge classic depth, speed, and temperature transducers with the display system, often within a wireless architecture (such as Raymarine’s Tacktick/Micronet systems). This is particularly relevant for sailboats where minimizing wiring and installation flexibility are key advantages.

For optimal installation, it is essential to follow mounting guidelines: vertically, at least 50 cm above the waterline, and in a ventilated environment, protected from direct water contact. This is not a submersible device or intended for sealed compartments. The standard power supply is 12/24Vdc, with the option to use a Raymarine solar panel for isolated installations.

The T905 differentiates itself through its role as a converter and transmitter for wired transducers, offering an alternative to directly NMEA 2000-compatible or wireless transducers. It is ideal for those who want to retain high-performance existing transducers or face cable routing constraints. It is critical to note the specific wiring requirements for Triducers and speed transducers without temperature sensors to ensure correct operation. This module is not a transducer itself but the core that interprets and transmits sensor signals.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda sondeja – prečna ali lepljena 50 mm

148,27€

148,27€ ~~162,00€~~

Frequently asked questions

Need help? Contact us

What are the mounting requirements for the T905 transmitter?

For correct installation, the T905 must be mounted vertically in a well-ventilated space and at least 50 cm above the waterline. It is crucial to avoid any direct contact with water.

At what height above the waterline should the T905 be mounted?

The T905 transducer must be mounted at least 50 cm above the waterline to ensure proper operation and prevent direct contact with water.

Can the T905 be installed in a watertight compartment?

No, the T905 MUST NOT be installed in a watertight compartment. It must be mounted in a well-ventilated area.

In which orientation should the T905 transducer be mounted?

The T905 must be mounted vertically, with the cables exiting from the bottom of the unit. It is important to note that the mounting template must be inverted relative to the transducer itself.

How to mount the T905 on the boat?

To mount the T905, drill three 2.5 mm holes at the locations marked "B" on the mounting template. The transmitter is then secured using the provided self-tapping screws. Do not overtighten the screws to avoid damaging the housing.

What is the procedure for connecting transducer cables to the T905?

Connecting transducer cables to the T905 is done by following the color coding indicated on the unit. It is essential to sleeve the cable shields to prevent any short circuits. Once connected, apply silicone grease to the contacts.

Is there a specific instruction for wiring a Triducer with the T905?

Yes, for a Triducer, the ground braid (the shielding) must be connected to the depth connector and NOT to the speed connector.

How to connect a speed sensor without a temperature sensor to the T905?

If your speed sensor does not include an integrated temperature sensor, you must connect the brown and white wires of the speed connector with a jumper wire to ensure proper data transmission.

Should silicone grease be applied to the T905 contacts?

Yes, it is recommended to apply silicone grease to the terminal contacts after connecting the transducer cables. This helps ensure reliable connections.

How to protect cables after connection to the T905?

After connecting the cables, it is important to support them near the transmitter. Then ensure the housing cover is properly fitted, as it is designed to hold and protect the outer cable sleeves inside the transmitter.

Which types of systems is the T905 designed to work with?

The T905 is designed to work with marine navigation systems that require centralized data from wired transducers (depth, speed, temperature) to the onboard instrumentation. It provides a solution for integrating existing sensors.

Is the T905 an alternative to direct NMEA 2000 systems?

Yes, the T905 is often used in setups where flexible integration of existing transducers is preferred over "all-in-one" transducers or direct NMEA 2000 systems. It provides a different method for sensor data integration.