Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 12%

Raymarine

A80465

Sonda prečnata bronasta 0° RV-200 RealVision 3D, neposredna povezava z AXIOM (kabel 8 m)

Conçue pour les écrans Raymarine Axiom, la sonde traversante RV-200 RealVision 3D en bronze offre une imagerie sous-marine détaillée (DownVision, SideVision, RealVision 3D). Son inclinaison de 0° est adaptée aux coques à faible ou sans inclinaison. Le produit inclut la sonde avec un câble intégré de 8m et une vis de fixation en bronze M8 x 100mm pour l'alignement.

Public priceGet pro pricing

1.103,14€

1.103,14€ ~~1.254,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Podprte sonar tehnologije	RealVision 3D,DownVision,SideVision
Delovna napetost	12 V DC
Frekvence sonarja	200 kHz (CHIRP Conique), 350 kHz (RealVision 3D, DownVision, SideVision)
Delovna temperatura	-25 à +55
Maksimalna globina merjenja	91.0
Material sondne sonde	Bronze
Tip konektorja za sonar	Raymarine RealVision 3D (25 broches)
Dolžina kabla	8.0
Vgrajen senzor temperature	Oui
Združljivi prikazovalniki	Raymarine Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL, Axiom 2 XL
Tip montaže	Traversante
Certifikati	CE
Kot prekrivanja snopa	180
Visoka frekvenca CHIRP	420
Nizka frekvenca CHIRP	350
Vrsta ribolova	Mer, Lac, Traîne, Verticale
Vgrajen senzor hitrosti	Non

Detailed description

Namenjena neposredni integraciji z večfunkcijskimi zasloni Raymarine Axiom, prečna sonda RV-200 RealVision 3D iz bronaste zlitine ponuja napredno rešitev za detekcijo podvodnega sveta. Ta pretvornik uporablja tehnologijo RealVision 3D za zagotavljanje podrobnega slikovnega prikaza podvodnega sveta, vključno s strukturami, morskim dnom in ribami. Kompatibilna je z funkcijama DownVision in SideVision, kar omogoča celovito raziskovanje pod in ob straneh plovila.

Konstrukcija in postavljanje

RV-200 se odlikuje po konstrukciji iz bronaste zlitine, kar jo naredi primerno za trupe iz steklenih vlaken ali lesa ter zagotavlja nadpovprečno trajnost v zahtevnih morskih pogojih. Z naklonom 0° je ta sonda namenjena trupom z majhnim ali nikakršnim naklonom (deadrise), kar zagotavlja, da je sonarjev snop pravokoten na morsko dno za optimalno delovanje. Integrira se neposredno v sisteme Axiom, kot so modeli Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL in Axiom 2 XL, kar poenostavlja namestitev in konfiguracijo.

Integracija in tehnične specifikacije

8 metrov dolg kabel, ki je integriran v sondu RV-200, omogoča neposredno povezavo z kompatibilnimi zasloni Axiom, kar odpravlja potrebo po zunanjem sonarjevem modulu. Ta konfiguracija zagotavlja hitro prenos podatkov in uporabniško vmesnik preko programske opreme LightHouse 4. Sistem za pritrditev vključuje vijak z šestkotno glavo iz bronaste zlitine M8 x 100 mm za poravnavo, kar zagotavlja stabilno in natančno namestitev. V nasprotju s serijami RV-3xx iz plastike ali RV-4xx iz nerjavečega jekla je RV-200 iz bronaste zlitine namenjena uporabnikom, ki iščejo povečano trdnost in zanesljivo delovanje v različnih pogojih, ne da bi pri tem ogrozili kakovost slikovnega prikaza RealVision 3D.

Documentation

Type	Nom
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	FR - Manuel d'utilisation - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)
	EN - Plan technique - Sonde traversante Bronze 0° RV-200 RealVision 3D, branchement direct AXIOM (Câble 8m)

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis: Raymarine RV-200 RealVision 3D through-hull transducer for Axiom »

The Raymarine RV-200 RealVision 3D through-hull transducer is a strategic choice for sailors and anglers equipped with an Axiom multifunction display whose vessel has a hull with low or no deadrise. Its bronze construction makes it ideal for permanent installations where robustness and corrosion resistance are paramount, particularly in saltwater or areas with high marine activity. The RealVision 3D technology is especially valued for detailed seabed mapping and precise detection of submerged structures, providing a clear advantage for sport fishing or navigation in complex waters.

The main advantage of this transducer lies in its direct connection to Axiom displays, significantly simplifying system architecture by eliminating the need for an external sonar module. This not only reduces overall cost and footprint but also minimizes potential failure points. The through-hull installation requires expertise for hull drilling and sealing, but the 0° tilt simplifies alignment on flat hulls. It is crucial to ensure the boat meets this hull angle requirement to maximize sonar beam performance.

While bronze offers excellent durability, it is important to note that this transducer is not recommended for aluminum hulls without specific precautions to prevent galvanic corrosion. For hulls with more pronounced deadrise, it would be preferable to opt for transducers with a tilted element (12° or 20°) to compensate for the hull angle and ensure optimal sonar coverage. The RV-200 is therefore a targeted, high-performance, integrated solution, ideal for applications where a 0° through-hull bronze transducer is technically justified.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda prečnata bronasta 0° RV-200 RealVision 3D, neposredna povezava z AXIOM (kabel 8 m)

1.103,14€

1.103,14€ ~~1.254,00€~~

Frequently asked questions

Need help? Contact us

What is the main function of the Raymarine RV-200 RealVision 3D fishfinder?

The RV-200 RealVision 3D fishfinder is designed to provide advanced and detailed underwater imaging. It uses RealVision 3D technology to display structures, the seabed, and fish with exceptional clarity. Additionally, it integrates DownVision and SideVision functions for complete exploration beneath and alongside your vessel.

Which Raymarine multifunction displays is the RV-200 transducer compatible with?

The RV-200 transducer is designed for direct integration with Raymarine multifunction displays in the Axiom family. It is compatible with the following models:

Raymarine Axiom
Raymarine Axiom+
Raymarine Axiom Pro
Raymarine Axiom 2 Pro
Raymarine Axiom XL
Raymarine Axiom 2 XL

For which type of hull is the RV-200 0° depth sounder specifically designed?

The RV-200 depth sounder with a 0° tilt is specifically designed for boat hulls with minimal or no deadrise. This design ensures a sonar beam perpendicular to the seabed, guaranteeing optimal imaging performance. It is suitable for fiberglass or wooden hulls.

What is the RV-200 depth sounder made of and what are its advantages?

The RV-200 depth sounder is made of bronze. This material provides superior durability and increased robustness, making it particularly suitable for demanding marine environments and fiberglass or wooden hulls.

Does the RV-200 transducer require an external sonar module to work with an Axiom display?

No, the RV-200 transducer is designed for direct connection to compatible Raymarine Axiom displays. Its integrated 8-meter cable allows the transducer to plug directly into the display, eliminating the need for an external sonar module. This setup simplifies installation and ensures rapid data transmission.

How is the RV-200 transducer mounted to the hull?

The RV-200 transducer is mounted to the hull using a robust mounting system. This includes an M8 x 100mm bronze hex-head screw designed to ensure stable and precise alignment of the transducer.

Which sonar technologies are integrated in the RV-200 sounder?

The RV-200 sounder integrates several advanced Raymarine sonar technologies for a complete underwater view:

RealVision 3D: For a detailed three-dimensional representation of the seabed and structures.DownVision: For a photorealistic view of the underwater world beneath the boat.SideVision: For a clear lateral view of structures and fish on the sides of the boat.

Is a specific calibration required after installing the RV-200 transducer?

Yes, after installing the RV-200 transducer, RealVision™ AHRS (Attitude and Heading Reference System) calibration is recommended. This calibration is essential to ensure the accuracy and optimal quality of RealVision 3D imaging, by ensuring the transducer correctly compensates for boat movements.