Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 12%

Raymarine

A80704

Sonda RVM-400 0° z vgradnjo skozi trup, nerjavni jeklo RealVision 3D, neposredna povezava na AXIOM2 in RVM1600 (kabel 8 m)

La sonde traversante Raymarine RVM-400 en inox (0°) offre les technologies RealVision 3D, DownVision, SideVision et CHIRP pour une imagerie sous-marine complète. Conçue pour un branchement direct aux écrans AXIOM2 et aux modules RVM1600, elle assure une intégration simplifiée. Cette sonde fait partie de la série RVM-400, offrant une alternative pour les coques à faible inclinaison, tandis que les RVM-412 (12°) et RVM-420 (20°) sont disponibles pour des angles de varangue différents. Inclus: la sonde RVM-400 avec un câble de 8 m.

Public priceGet pro pricing

1.672,91€

1.672,91€ ~~1.914,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Podprte sonar tehnologije	RealVision 3D, DownVision, SideVision, CHIRP haute fréquence
Material sondne sonde	Inox
Tip konektorja za sonar	Connecteur RealVision 25 broches
Dolžina kabla	8.0
Združljivi prikazovalniki	Raymarine Axiom, Axiom+, Axiom 2 Pro RVM, Axiom Pro, Axiom XL, et modules sondeur RVM1600
Brezžična povezanost	Non
Tip montaže	Traversante
Certifikati	CE, FCC, RCM
Visoka frekvenca CHIRP	150-230
Garancija	2.0

Detailed description

Sonda Raymarine RVM-400 zagotavlja rešitev za 3D sonar RealVision na navigacijskih sistemih, ki so združljivi. Namenjena je vgradnji skozi trup pod kotom 0° in je izdelana iz nerjavnega jekla. Vsebuje tehnologije DownVision, SideVision, RealVision 3D in visokofrekvenčni sonar CHIRP, kar zagotavlja podrobne poglede pod vodo. Sonda se neposredno povezuje na multifunkcijske zaslone AXIOM2 in sonarne module RVM1600, kar poenostavlja integracijo v omrežje Raymarine.

Vgrajeni sonarni tehnologiji

RVM-400 združuje več sonarnih tehnologij za popolno pokritost morskega dna in vodnega stolpca. Zmožnosti DownVision in SideVision omogočajo lateralno in vertikalno zaznavanje struktur in rib, medtem ko RealVision 3D zagotavlja tridimenzionalno predstavitev podvodnega sveta. Visokofrekvenčni sonar CHIRP zagotavlja izboljšano ločljivost tarč in jasnost slike v primerjavi s sonarji s fiksno frekvenco. Ta sonda je ključni element serije RVM-400, ki vključuje tudi modele RVM-412 in RVM-420, ki se razlikujejo po kotih kompenzacije za različne nagibe trupa.

Integracija in vgradnja

RVM-400 je namenjena neposredni povezavi na zaslone AXIOM2 in sonarne module RVM1600, kar odpravlja potrebo po dodatnih vmesnikih in zagotavlja optimalno združljivost. 8-metrski kabel olajšuje postavljanje sonde na večini plovil. Vgradnja skozi trup iz nerjavnega jekla zagotavlja varno pritrditev in trajnost v morskem okolju. Za vgradnje, ki zahtevajo daljše kable, so na voljo podaljškovni kabli RealVision, ki omogočajo doseganje največjih razdalj povezave.

Documentation

Type	Nom
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	FR - Manuel d'utilisation - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis of the Raymarine RVM-400 RealVision 3D through-hull transducer »

The Raymarine RVM-400 through-hull transducer is a technical solution for recreational boaters and anglers equipped with an AXIOM2 system or an RVM1600 module. Its main advantage lies in its direct integration, which minimizes potential failure points and simplifies wiring. Unlike solutions with external adapter boxes, this direct connection ensures RealVision 3D data transmission without latency, essential for real-time detection of structures and fish schools.

The choice of a 0° stainless steel through-hull transducer is relevant for hulls with low deadrise angles. For boats with a more pronounced deadrise angle, the RVM-412 (12°) or RVM-420 (20°) models from the same series would be better suited to optimize beam quality and avoid air bubbles. The integrated engineering of the RVM-400 allows for precise AHRS (Attitude and Heading Reference System) calibration, ensuring stable 3D imaging even in rough seas. This is a significant advantage for users seeking consistent and reliable visualization.

Installation requires precise hull drilling, but electrical connection is simplified thanks to the direct connector. It is crucial to follow placement guidelines to avoid interference and ensure optimal sonar performance. This transducer is particularly recommended for mid-sized boats seeking a high-performance sonar imaging solution without the complexity of a modular system with additional interface boxes.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda RVM-400 0° z vgradnjo skozi trup, nerjavni jeklo RealVision 3D, neposredna povezava na AXIOM2 in RVM1600 (kabel 8 m)

1.672,91€

1.672,91€ ~~1.914,00€~~

Frequently asked questions

Need help? Contact us

Which sonar technologies are integrated in the Raymarine RVM-400 transducer?

The Raymarine RVM-400 transducer integrates several advanced sonar technologies for comprehensive underwater vision:

DownVision: Provides a detailed view of the seabed directly beneath the boat. SideVision: Scans lateral areas to detect structures and fish on the sides. RealVision 3D: Delivers a three-dimensional representation of the underwater environment. High-frequency CHIRP sonar: Enhances target discrimination and image clarity.

What material is the RVM-400 transducer made of and what is its compensation angle?

The Raymarine RVM-400 transducer is made of stainless steel, ensuring durability and resistance in a marine environment. It is designed for through-hull installation with a 0° compensation angle. This means it is ideal for hulls with a deadrise angle of 0° at the installation location.

What is the length of the cable supplied with the Raymarine RVM-400 transducer?

The Raymarine RVM-400 transducer is supplied with an integrated 8-metre (26.2-foot) cable. This length is designed to facilitate the positioning of the transducer on most vessels.

Which Raymarine multifunction displays directly integrate compatibility with the RVM-400 transducer?

The Raymarine RVM-400 transducer is designed for direct connection to Raymarine AXIOM2 multifunction displays. These displays integrate RealVision technology, which processes the transducer data without requiring an additional module.

Can the RVM-400 transducer be used with other Raymarine multifunction displays besides the AXIOM2?

Yes, the RVM-400 transducer is compatible with other Raymarine multifunction displays in the Axiom series, such as the Axiom 2 Pro, Axiom 2 XL, Axiom Pro, Axiom XL, and Axiom MFDs. For these models, the transducer must be connected to an RVM1600 sounder module.

What is the recommended installation type for the RVM-400 transducer?

The Raymarine RVM-400 is a thru-hull transducer. This means it is installed by drilling a hole through the hull, allowing the transducer element to be directly exposed to the water beneath the hull for optimal performance.

Should antifouling be applied to the RVM-400 depth sounder?

Yes, it is recommended to apply antifouling to the RVM-400 depth sounder to prevent marine growth buildup. It is important to use a water-based antifouling specifically formulated for transducers to avoid affecting the probe's performance. Avoid antifoulings containing metal, as they could interfere with the sonar signal.