Veja SeaTalk NG dolžina 1 meter odkrit

The Raymarine A06043 cable is a spur (also called a "branch") of the SeaTalkng network system. It is 1 meter long and has a tinned end, meaning it is not terminated with a standard connector, allowing for custom connections or specific terminations.

The Raymarine A06043 cable is used to connect individual Raymarine products, such as instruments or sensors, to the backbone of a SeaTalkng network. It is a key component of Raymarine's proprietary interconnection bus, enabling data communication between different onboard ship equipment.

The "stripped" end of this cable provides high flexibility for custom installations. Unlike pre-terminated cables, it allows the installer to create a specific termination or connect to terminal blocks or devices that do not have standard SeaTalkng connectors, requiring direct wiring.

Cable A06043, as a SeaTalkng spur, is typically white. In the SeaTalkng system, the color code is as follows: backbone cables are blue, spurs are white, and power cables have a red stripe.

The A06043 cable is a branch, or "spur", of the SeaTalkng network. Branches are used to connect individual products to the system's main "backbone" (spine), which carries power and data across the network.

Cable A06043 connects on one end to a Raymarine product compatible with SeaTalkng (via its standard connector) and on the other end to a branch connector available on the SeaTalkng backbone (typically through a T-connector or junction block). The stripped end allows for custom connection to the device or terminal block if required.

The A06043 cable is a spur and does not require a terminator. Terminators are mandatory and must be installed only at the two ends of the SeaTalkng backbone to ensure correct data transmission.

This cable is compatible with all Raymarine products designed to connect to a SeaTalkng network. This includes instruments such as the ST70, as well as other sensors and multifunction displays featuring a SeaTalkng interface.

Cable A06043 is a native component of Raymarine's SeaTalkng network. To interconnect it with NMEA2000 systems, specific adapter cables or Raymarine products with bridging functionality are required. Cable A06043 itself does not connect directly to an NMEA2000 port without an adapter.

The A06043 cable is designed for SeaTalkng. To connect it to an older SeaTalk(1) system, specific adapter cables are required. Some newer Raymarine products may also include a bridging function to facilitate compatibility between SeaTalkng and SeaTalk(1).

Yes, although the SeaTalkng reference manual dates from 2007, this system remains a reliable and widely deployed solution for data communication on vessels. It provides native connectivity for many Raymarine products and is still used for extending or modifying existing installations.

A "spur" cable (branch), such as the A06043, is used to connect a single device (instrument, sensor) to the backbone of the network. It is typically white in color.A "backbone" cable (backbone) is the main line of the network that links the branch connectors and carries power and data throughout the entire system. It is typically blue in color and must be terminated at each end.

The power supply must be connected to the backbone of the SeaTalkng network. It is recommended to connect it at a central or balanced point along the backbone to ensure optimal power distribution to all connected devices.

SeaTalkng pre-terminated cables should generally not be cut or spliced, as this could compromise signal integrity and EMC compliance. However, part number A06043 is specifically designed with a stripped end to allow custom terminations and direct connections, providing flexibility for specific installations.

During installation, it is important to follow EMC installation guidelines, ensure cables are routed properly to avoid interference and physical damage, and not to power up the network until the full installation is complete. Also ensure terminations are correctly installed at the backbone ends.

Raymarine equipment and accessories, including SeaTalkng cables, are designed to industry-leading standards for recreational marine use and comply with electromagnetic compatibility (EMC) regulations. Proper installation is essential to ensure performance is not compromised.

SeaTalkng connectors are of small diameter. This design aims to simplify installation by making it easier to route cables and connectors through tight spaces aboard a vessel.

Yes, the SeaTalkng system is designed to simplify installation, and the cables are generally flexible enough to adapt to routing constraints aboard a vessel. The variety of cable lengths available and the design with a stripped end for the A06043 provide additional flexibility.

The A06043 cable is a proprietary component of Raymarine for the SeaTalkng network. While SeaTalkng can be interconnected with NMEA 2000 systems via adapters, this specific cable is designed for Raymarine products compatible with SeaTalkng and is not directly compatible with equipment from other brands without an adapter or specific interface.

A SeaTalkng network consists primarily of:

A backbone: the main network cable.Terminators: one at each end of the backbone.Spurs: cables such as A06043, which connect individual products to the backbone.Connectors: T-pieces, 5-way or inline, to link cables.A power cable: to supply power to the network.