Connectador de 5 vies SeaTalk NG

The A06064 5-way connector serves as a central junction point to create or extend a Raymarine SeaTalk NG navigation network. It allows multiple instruments to be connected in a simple and organized manner to the network backbone, replacing the use of multiple T-connectors.

Connector ports use specific colors to prevent wiring errors:

Blue ports (2): These are exclusively for backbone cables to build or extend the main network.White ports (3): These are for spur cables connecting individual devices (displays, sensors, etc.) and power to the network.

Yes, this is possible but it requires an adapter. Raymarine's SeaTalk NG network uses the same data protocol as NMEA 2000, but the physical connectors are different. To connect a device from another brand with standard NMEA 2000 connectivity, you will need a SeaTalk NG to NMEA 2000 adapter cable.

Yes, like any SeaTalk NG or NMEA 2000 network, the backbone must be terminated at both ends with a terminator. If this 5-way connector is at one end of your network, one of the blue ports must be connected to the backbone cable and the other blue port must be closed with a SeaTalk NG terminator.

Powering the SeaTalk NG network is done via a dedicated power cable. This cable must be connected to one of the three white ports (spur ports) on the connector. It is essential to have only one power source for your entire network.

You can connect up to three devices or instruments to this connector via its three white spur ports. If you use one of these ports for network power, you will have two ports available for your instruments.

No, not directly. SeaTalk NG and SeaTalk1 are different protocols and wiring systems. To integrate SeaTalk1 devices into a SeaTalk NG network, you must use a Raymarine SeaTalk1 to SeaTalk NG conversion gateway (reference E22158).

Yes. To extend your network, you can connect two 5-way blocks (or more) using a SeaTalk NG backbone cable (blue cable). Simply connect one blue port from each block with this cable to extend the backbone of your network.

No, the 5-way A06064 connector is sold separately. The backbone cables (blue), branch cables (white), end caps, and power cable must be purchased separately based on your installation requirements.

In accordance with SeaTalk NG and NMEA 2000 standards, the maximum length for a single spur cable must not exceed 6 meters. It is recommended to use the shortest possible cable length to connect your devices to ensure network integrity.

No, this connector is specifically designed with Raymarine’s proprietary SeaTalk NG cabling. It cannot be inserted directly into a backbone using standard NMEA 2000 connectors (DeviceNet type). It is intended for Raymarine installations.

The 5-way connector housing has mounting holes. You can simply screw it onto a bulkhead or a flat surface inside a console or in a technical compartment for a secure and stable installation.

The SeaTalk NG 5-way connector (reference A06064) weighs approximately 0.02 kg (20 grams), making it very lightweight and easy to install anywhere on the boat.

The packaging for part number A06064 contains only the 5-way SeaTalk NG connector block. All cables, terminators, and other accessories are sold separately.

Yes, absolutely. As a Raymarine product, the A06064 connector is manufactured with robust materials and sealed joints to resist humidity, vibrations, and water spray, ensuring reliable connections in marine conditions.

Yes, you can plug a compatible Raymarine SeaTalk NG GPS antenna into any of the three white ports (spur) on this connector using the appropriate SeaTalk NG spur cable length.

The 5-way block offers several advantages:

Reduced footprint: It is more compact than a series of T-connectors, ideal for tight spaces.Simplified installation: Fewer parts to assemble, making assembly faster.Increased reliability: It reduces the number of connection points, minimizing the risk of poor contacts.

It is recommended to install it in a dry and accessible location, such as behind a console or dashboard. Its compact format makes it ideal for areas where space is limited, allowing centralization of connections for a group of nearby instruments.

No, the physical connectors are different. You must use Raymarine SeaTalk NG cables (with blue connectors for the backbone and white for the drop lines) to connect directly to this block.

Yes, the A06064 connector and the entire SeaTalk NG wiring system are designed for the marine environment and are splash-proof, ensuring reliable connections even in wet conditions.