3FT Green UTP Slim CAT6 28AWG Ethernet/Network Cables

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Amphenol

MP-64RJ4528GG-003

3FT Green UTP Slim CAT6 28AWG Ethernet/Network Cables

UTP SLIM CAT6 28AWG green Ethernet/network cables for data or Ethernet connections aboard, suitable for AMPHENOL installations. Length indicated: 3 ft.

Retail priceBenefit from the professional rate

10,93€

10,93€ ~~12,14€~~

Tax included. Shipping calculated at checkout.

Low stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	RJ45
Cable segment	Marine data network / Ethernet
Cable type	Cat6 Ethernet cable
Compatibility Scope	Exact reference of the equipment to check before ordering
Environment	Marine installation
Installation Advice	plan separate routing for high-power circuits and avoid tight bend radii
Installation Check	the connector type, network category, and useful length between equipment
Length	3 ft
Length Ft	3
Network protocol	Ethernet
Product Usage	Battery bank
Skysat Usage	data or Ethernet connection onboard

Detailed description

Ethernet/network UTP SLIM CAT6 28AWG green cable 3FT is an Ethernet cable designed for data or Ethernet connections aboard. It complements an existing installation or replaces a worn cable while maintaining a reference suitable for marine electronics.

This sheet is part of the Marine Data Network/Ethernet family. Length indicated: 3 ft. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact AMPHENOL equipment before ordering.

For reliable installation, route cables separately from high-power lines and avoid tight bend radii. Also check the connector type, network category, and usable length between devices before sealing cable passages.

Documentation

Type	Nom
	MP_64RJ4528GX-2634485 (1).pdf

Expert opinion

Pol CONIN

Digital Manager

« Review Skysat - Ethernet/network UTP SLIM CAT6 28AWG green 3FT cables »

Skysat advice: select this cable based on the equipment to be connected, not only on available length. Check the connector, pinout, and actual routing inside the boat before ordering.

When the cable runs through mast, coachroof, or damp area, leave a service loop, protect connections, and avoid intermediate splices. This prevents many difficult diagnostics after installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

3FT Green UTP Slim CAT6 28AWG Ethernet/Network Cables

10,93€

10,93€ ~~12,14€~~

Frequently Asked Questions

Need help? Contact us

What is the purpose of UTP SLIM CAT6 28AWG green 3FT Ethernet/network cables?

UTP SLIM CAT6 28AWG green 3FT Ethernet/network cables are used for the following function: data or Ethernet connection on board. They are designed for installations where you want to maintain a reference suited to the equipment rather than an approximate cable.

Which equipment is it compatible with?

Compatibility depends on the exact AMPHENOL device reference. Before ordering, verify the connector, pinout, and documentation of the equipment to be connected. Identified cabling: RJ45.

What needs to be checked before installation?

Check the connector type, network category, and usable cable length between devices. Also plan the actual cable routing, bulkhead penetrations, and service margins at the ends.

How to install it cleanly on board?

Plan a separate routing path for high-power lines and avoid tight bends. Connectors must not be subjected to tension, and exposed joints must be protected from moisture.

Does the indicated length always suffice?

The indicated length is 3 ft. Measure the actual passage inside the boat before ordering, adding the necessary margin for bends, drops, and service loops.

Why choose an OEM part number?

An OEM part number reduces the risk of wiring errors, connector mismatches, or signal level issues. This is especially critical for AMPHENOL connections, radar, antenna, marine bus, or data links.