FRU-RZWPWP-005G — 5 m RJ45 network cable, waterproof at both ends, for NavNet TZtouch XL displays

The FURUNO FRU-RZWPWP-005G network cable is designed to establish a LAN (Local Area Network) link between marine equipment. It ensures data transmission for NavNet TZtouch XL series units, including the TZTBBX processor and other TZT-series units.

This FURUNO FRU-RZWPWP-005G network cable has a length of 5 meters.

The cable uses waterproof RJ45 connectors at both ends, specifically designed for marine environments.

Yes, this cable is specifically designed for marine use. It features waterproof RJ45 connectors and its design ensures reliable data transmission aboard vessels.

The exact reference for this network cable is FRU-RZWPWP-005G, with SKU 00165326000.

Yes, the FRU-RZWPWP-005G cable is a FURUNO product, designed to integrate seamlessly with their NavNet TZtouch XL systems.

A waterproof RJ45 connector is designed to resist water and moisture intrusion, protecting the network connection in a marine environment. This ensures the reliability and durability of the data link aboard.

This cable is primarily designed for network data transmission (LAN). It provides a data link between your NavNet TZtouch XL system equipment and other units in the TZT series.

This cable is compatible with TZtouchXL series displays, including models TZTBBX, TZT10X, TZT13X, TZT16X, TZT22X, and TZT24X.

Yes, this cable is compatible with some older units:

Compatible with: TZtouch2 (TZT2BB), TZtouch3 (TZT9F, TZT12F, TZT16F, TZT19F)
Not compatible with: TZtouch (TZT9, TZT14, TZTBB), TZtouch2 (TZTL12F, TZTL15F)

Yes, this cable is fully compatible with the TZTBBX processor, allowing integration into your vessel's network.

Yes, this cable can be used for DRS (Digital Radar Sensor) connections to the NavNet TZtouch XL system.

Yes, this cable is compatible with Furuno Ethernet hubs, such as HUB-101 and HUB-102, to extend your onboard network.

No, this cable is an RJ45 network cable designed for Ethernet LAN connections. The NMEA 2000 protocol uses a different type of cable and connectors (typically micro-C or mini-C) and is not directly compatible with this cable's RJ45 connections.

Yes, this cable is an essential component for extending or connecting TZT series units to your vessel's LAN network, facilitating interconnection with other TZtouch units or network hubs.

Yes, during installation, it is essential to respect the cable's bend radius and protect it from excessive mechanical stress to ensure durability and reliable connection. It is also recommended to plan an optimized cable path to minimize unnecessary lengths.

Detailed information on wiring and installation is available in the TZTBBX processor installation manual, specifically in section 2.6 'Network Connection with Other TZT Series Units' and 2.5 'DRS Radar Sensor Connections'.

Yes, this cable facilitates interconnection with other TZtouch units, DRS radar sensors, or network hubs, enabling a functional network architecture and data exchange between multiple devices.

Yes, this cable can be used to connect IP cameras (up to a maximum of 8 cameras) to your NavNet TZtouch XL system, provided the camera's IP address settings are respected.