Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Garmin

010-11532-00

Rudder angle feedback cable

Designed for Garmin GHP 12 and Reactor 40 systems, the 010-11532-00 rudder feedback cable ensures reliable integration of third-party rudder sensors using potentiometer-type feedback. It provides accurate position data to optimize autopilot performance. The product includes the rudder feedback cable only.

Retail priceBenefit from the professional rate

13,50€

13,50€ ~~14,99€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Section (mm²)	0.34
Section (AWG)	22.0
Number of conductors	3.0
Color	Black
Max voltage	30.0
Shielding	Shielded
Flexibility	Flexible
Current type	DC
Nominal current	0.1
Jacket material	Marine-grade PVC
Conductor material	Tinned copper
Certifications	CE
Conductor finish	Tinned
Cable type	Control cable
Compatible network	Garmin autopilot systems (GHP 12, Reactor 40)
Pre-molded connectors	One side molded, the other stripped
Installation location	Marine environment
Cable application	Rudder position feedback
Operating temperature	-15°C to 70°C
Storage temperature	-20°C to 85°C
Min bend radius	20
Connector type	Garmin owner (ECU side), stripped wires (sensor side)
UV resistance	Yes
Compatible Autopilot Systems	GHP 12, Reactor 40
Type de capteur compatible	3-terminal potentiometer, rotary encoder
Connection Point Ecu	Orange port of the SmartPump ECU
Connection Point Sensor Side	Bare wires
Data Signal Type	Real-time rudder position
Incompatible Sensor Type	Frequency-based sensor
Integration Flexibility	High
Jacket Material Properties	Marine environment resistance, UV resistance
Max Operating Voltage Dc	30
Nominal Operating Voltage	12/24
Product type	Rudder feedback cable

Detailed description

The Garmin rudder angle feedback cable (part number 010-11532-00) is an accessory designed to provide rudder position feedback to compatible Garmin autopilot systems, particularly when integrating third-party rudder sensors. This cable is specifically intended for Garmin GHP 12 autopilot systems, as well as certain mechanical or solenoid retrofit installations of the Reactor 40 system when a non-Garmin rudder sensor is used.

System Compatibility and Integration

This cable is compatible with any 3-terminal potentiometer or rotary encoder-type rudder sensor. It connects to the end of the orange port on the SmartPump ECU, while the other end features stripped wires for connection to the third-party rudder reference sensor. It is important to note that this cable is not compatible with frequency-based rudder feedback sensors. By transmitting real-time rudder position data, it enables the autopilot system to optimize performance and ensure precise steering. This approach offers integration flexibility for existing or custom installations where a third-party rudder sensor is already in place or preferred, unlike fully proprietary solutions that require sensors from the same brand.

Marine Design and Reliability

Constructed from marine-grade components, the 010-11532-00 cable features a robust and flexible design capable of withstanding demanding marine environments. It offers resistance to salt, UV rays, and general wear, incorporating anti-corrosion connectors for enhanced durability. Its compact dimensions and low weight (approximately 0.11 kg for the cable alone) also make it an easy spare to keep on board for quick troubleshooting of steering or rudder angle defects.

Expert opinion

« Garmin tiller pilot feedback cable: essential integration for third-party sensors »

This Garmin tiller feedback cable is a critical component for integrators and users looking to maximize the flexibility of their autopilot system. Its role is to ensure the connection between a third-party tiller sensor, such as a potentiometer or 3-terminal rotary encoder, and Garmin GHP 12 or Reactor 40 computers via the SmartPump ECU. It is crucial to verify the compatibility of the third-party sensor, as this cable is not suitable for frequency-based sensors.

Its main advantage lies in its ability to simplify retrofit installations or custom configurations where an existing or preferred tiller sensor is not Garmin-branded. Integration is relatively straightforward: one end plugs into the dedicated orange port on the SmartPump ECU, while the other, with stripped wires, requires careful connection to the third-party sensor. This solution provides accurate tiller position feedback, essential for autopilot algorithm performance, without the need to replace a functional sensor. It is an integration part that adds significant value in terms of system compatibility and maintenance.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Rudder angle feedback cable

13,50€

13,50€ ~~14,99€~~

Frequently Asked Questions

Need help? Contact us

What is the Garmin 010-11532-00 tiller feedback cable?

The Garmin tiller feedback cable (part number 010-11532-00) is an accessory designed to provide tiller position feedback to compatible Garmin autopilot systems. It is specifically used for integrating third-party tiller sensors.

What is the purpose of this Garmin tiller feedback cable?

This cable enables the autopilot system to receive accurate real-time data on the rudder angle. This information is critical for optimizing autopilot performance and ensuring precise vessel steering.

What is the product reference (SKU) for this cable?

The product reference (SKU) for this cable is 010-11532-00.

Is this cable an official Garmin product?

Yes, this is an official Garmin accessory.

What is the primary function of the rudder feedback cable?

Its primary function is to facilitate the integration of third-party (non-Garmin) tiller sensors with compatible Garmin autopilot systems by transmitting a reliable tiller position feedback signal.

Is the cable supplied with a rudder sensor?

No, this product is only the rudder feedback cable. It is designed to be used with a third-party rudder sensor that is either already installed or purchased separately.

Can this cable improve the accuracy of my autopilot?

Yes, by providing real-time rudder position data, this cable enables the autopilot system to optimize its performance and ensure more precise steering.

What type of data does the cable transmit?

The cable transmits real-time rudder position data to the Garmin autopilot system.

Which Garmin autopilot systems is this cable compatible with?

This cable is specifically compatible with Garmin GHP 12 autopilot systems. It can also be used with certain mechanical or solenoid retrofit installations for Reactor 40 systems, provided a non-Garmin rudder feedback sensor is used.

Which third-party autopilot sensors can be connected with this cable?

This cable is compatible with any tiller sensor of potentiometer type with 3 terminals or any rotary encoder.

Are there third-party rudder sensors incompatible with this cable?

Yes, this cable is not compatible with frequency-based rudder feedback sensors.

Is this cable designed for Garmin or third-party rudder sensors?

This cable is specifically designed for integrating third-party tiller sensors (non-Garmin) with compatible Garmin autopilot systems.

Does the cable work with all Reactor 40 systems?

No, it is compatible only with certain mechanical or solenoid retrofit installations of Reactor 40 systems, and only if a non-Garmin rudder sensor is used.

Can it be used with autopilots from other brands?

This cable is designed for Garmin autopilot systems that are compatible. Its compatibility with autopilots from other brands is not specified.

Why use a third-party tiller sensor with this cable instead of a Garmin sensor?

This cable provides integration flexibility for existing or custom installations where a third-party rudder sensor is already in place or preferred. It allows non-Garmin solutions to be adapted to compatible Garmin autopilot systems.

How does the cable connect to the SmartPump ECU?

The cable connects to the end of the orange port on the SmartPump ECU.

How is the other end of the cable connected to the third-party autopilot drive?

The other end of the cable is fitted with stripped wires. These wires are intended to be connected directly to the corresponding terminals of the third-party autopilot reference sensor.

Is the installation of this cable complex?

The installation involves electrical connections with bare wires. It is recommended that the installation be carried out by someone with knowledge of marine electrical systems or by a professional to ensure a correct and secure connection.

Is the cable supplied with a connector for third-party rudder sensor?

No, the end of the cable intended for the third-party autopilot sensor is supplied with stripped wires. The third-party sensor-specific connectors must be provided or installed by the user.