i70s Depth, Speed ​​and Wind Pack

The i70s display features a 4.1-inch TFT color screen. It is designed to show essential navigation data such as depth, speed, and wind. It operates on a 12VDC power supply and has an IPX6 and IPX7 waterproof rating, making it resistant to marine environments.

The i70s Depth, Speed and Wind pack is designed to display depth, speed and wind data. Thanks to its network connectivity, it can also display other critical vessel information if the corresponding sensors are connected to the network. This information may include:

Battery dataVessel dataDistance dataEngine dataFuel dataEnvironmental dataGPS dataHeading dataNavigation dataAutopilot dataTime dataAIS data

The i70s display is equipped with a 4.1-inch TFT color screen designed for clear reading of information. It allows adjusting display brightness to adapt to different lighting conditions, including full sunlight.

Yes, the i70s display allows you to customize favorite pages and data display. You can choose from predefined layouts such as:

Heading & speedDepth numericSpeed numericSpeed dialApparent wind & apparent wind speedYou can also create, edit, delete, or rearrange custom pages to display the information you need most.

For maintenance of the i70s pack, routine checks and regular cleaning of the following components are recommended:

The display housingThe display screenThe sun coverThe transducers (depth, speed, wind)Use mild, non-abrasive cleaning products to avoid damaging surfaces.

The i70s pack is designed to integrate into a Raymarine SeaTalk NG network. It is also fully compatible with systems based on the NMEA 2000 protocol, enabling seamless communication with other onboard electronic devices. A SeaTalk 1 connection is also possible via an adapter (not included in the base pack).

The i70s system requires a 12VDC power supply. It is critical not to connect it to a voltage higher than this specification to avoid permanent damage to the product.

No, it is imperative NOT to connect this unit to a system with a positive ground. The product must be properly grounded in accordance with the instructions provided in the installation manual.

This pack includes depth, speed, and wind sensors. The i70s display is compatible with a wide range of Raymarine transducers, including:

Smart transducersDST transducers (depth, speed, temperature)Separate depth, speed, and temperature transducersWind transducers (vane or Rotavecta type)RSW-Series transducersIt can also connect via an iTC-5 interface for analog sensors.

Installing the i70s display requires considering several factors. It must be mounted at a safe distance from your boat’s magnetic compass to avoid interference. General placement requirements, viewing angles, and EMC (Electromagnetic Compatibility) installation guidelines must also be followed to ensure optimal performance and safety.

Yes, it is essential to follow the general wiring guidelines for the i70s system. This includes:

Choosing the appropriate cable types and lengthsRespecting cable bend radiiUsing strain relief devicesEnsuring adequate cable shieldingAll SeaTalk NG cables must be connected correctly to ensure proper system operation.

SeaTalk NG network power is supplied via a 12VDC connection. An inline fuse is required, and its rating must match system specifications to protect connected equipment. The power connection point must be selected carefully to ensure efficient current distribution to all SeaTalk NG products.

Raymarine strongly recommends installation by a Raymarine-certified installer. A certified installation may qualify for enhanced product warranty benefits.

The included transducers (depth, speed, wind) connect to the SeaTalk NG network. Connection methods are as follows:

For smart transducers: a direct connection to the SeaTalk NG network is possible. For traditional transducers: an interface such as the iTC-5 can be used to convert analog signals into SeaTalk NG digital data. The installation manual provides precise details on wiring the transducers.

Installing the i70s display typically involves the following steps:

Removing the front panel. Removing the keypad. Preparing the mounting location (drilling if necessary). Securing the unit. Reinstalling the keypad and front panel. Detailed instructions with a mounting diagram are provided in the installation manual.

You can register the warranty for your product on Raymarine’s official website. Installation by a Raymarine-certified installer may also provide enhanced warranty benefits.

The weight of the i70s Depth, Speed and Wind pack is 5.83 kg. The packed weight is 6.67 kg.

Yes, it is possible to update the software on the i70s display. Raymarine recommends checking their website regularly for the latest software versions to benefit from new features and improvements. Instructions for checking hardware and software information, as well as performing updates, are detailed in the user manual.

Yes, the i70s display allows detailed sensor calibration. You can perform:

Depth calibration (including transducer offset).Speed calibration (single-point calibration, speed trial calibration).Water temperature calibration.Wind calibration (transducer alignment, apparent wind speed adjustment).Compass calibration.

When installing the i70s display, it is critical to maintain a minimum safe distance from any magnetic compass on board. This distance is specified in the installation manual to prevent interference that could affect compass accuracy.