Système de cale automatique Bilge IC - 12 V Whale – référence SI8284

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

En cours de réapprovisionnementSave 10%

Whale

SI8284

Whale Bilge IC 12V Automatic Bilge System

The Whale Bilge IC 12V automatic bilge system (reference SI8284) is a 4-in-1 integrated solution for draining boat bilges up to 12 meters. Combining a Gulper IC pump, a Strainer IC strainer, a non-return valve, and an electronic control unit, it provides intelligent monitoring and self-priming operation with a flow rate up to 19 liters/minute.

Supplied with a Gulper IC pump and a Strainer IC strainer.

Retail priceBenefit from the professional rate

641,75€

641,75€ ~~709,34€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Auto Operating Voltage Range 12v	10 V DC to 13.6 V DC
Cable length	4
Type de contrôle	Built-in smart control
Current Profile	Gradual start and stop
Fuse rating	10 Amp Automotive
Hose Connection Diameter Pump Mm	19, 25
Hose Connection Type	Barbed
Iso Compliance Standard	ISO15083
Material	Pump head: glass-reinforced nylon; Valves and diaphragm: Santoprene®; Pump body: aluminum; Impeller: Delrin®; Fasteners: stainless steel
Max Boat Length Primary Ft	39.4
Max Boat Length Primary M	12
Minimum Wire Gauge	1.5mm² (16 AWG)
Operating voltage	12 V DC
Détail du type de produit	Automatic bilge system
Pump Type	Bilge pump
Suitable As Primary Bilge Pump	Yes
Suitable As Secondary Bilge Pump	Yes
System Type	Remote-mount trunking kit
Weight	2.6

Detailed description

The Whale Bilge IC 12V automatic bilge system (reference SI8284) is an integrated solution designed for efficient bilge drainage on recreational vessels. This 4-in-1 system combines a high-capacity Gulper IC pump, a Strainer IC strainer, an integrated non-return valve, and an electronic control switch, reducing installation complexity and the number of separate components.

Intelligent Control and Automatic Operation

Equipped with Intelligent Control (IC) technology, the Whale Bilge IC system automatically detects the presence of water, eliminating the need for an external float switch. The Gulper IC pump activates and deactivates based on signals sent by the Strainer IC strainer. Its self-priming function and ability to run dry without damage ensure operational reliability. The soft start feature protects the pump and extends its lifespan, while controlled low-current switching prevents switch failures.

Performance and Installation

Designed for remote installation, the pump can be mounted up to 4 meters from the bilge area, facilitating access for inspection and maintenance while protecting it in a dry environment. The system offers a flow rate of up to 19 liters per minute (300 US GPH) with a maximum suction head of 3 meters and a maximum discharge head of 3 meters, for a combined head of 4 meters. The compact, low-profile Strainer IC strainer fits in tight spaces and drains water down to a level of less than 6 mm. The hose connections are compatible with 19 mm (3/4") or 25 mm (1") diameters. The discharge port orientation is adjustable (horizontal or vertical) to suit various plumbing configurations. A bypass wire is included for manual activation.

Technical Specifications and Durability

Nominal Voltage: 12 V DC (range 10 V to 13.6 V DC)
Current Consumption: Maximum 7.5 A (or 8 A), standby 0.01 A
Recommended Fuse: 10 A
Minimum Cable Cross-Section: 1.5 mm² (16 AWG)
Cable Length: 4 meters
Weight: 2.6 kg
Materials: Pump head in glass-filled nylon, valves and diaphragm in Santoprene®, pump body in aluminum, gear in Delrin®, fasteners in stainless steel.
Certifications: Compliant with ISO 8849 and ISO 15083, CE certified, EMC compliant, NMMA approved, ignition protected (ABYC and USCG).
Warranty: 3 years.

The system is suitable as a primary bilge pump for boats up to 12 meters (39.4 feet) or as a secondary pump for any recreational vessel. It is designed for bilge water pumping only and does not contain mercury.

Documentation

Type	Nom
	EN+FR - Installation Guide - Whale Bilge IC - , SI8484

Expert opinion

« Expert analysis: Whale Bilge IC 12V automatic bilge system »

The Whale Bilge IC 12V automatic bilge system represents a significant advancement in onboard drainage management. Its main added value lies in its 4-in-1 integration, combining pump, strainer, non-return valve, and electronic control in a pre-wired assembly. This design greatly simplifies installation by reducing connection points and the risk of errors commonly associated with modular systems.

This model is particularly relevant for sailboats and recreational powerboats up to 12 meters (39.4 feet), where it can serve as the primary bilge pump with its 19 liters/minute capacity. For larger vessels, it makes an excellent secondary bilge pump, providing redundancy and increased reliability. The ability to mount it up to 4 meters away from the bilge allows positioning the pump in a dry, easily accessible space, thus extending its lifespan and facilitating inspections.

In terms of installation, the Intelligent Control (IC) system is a major asset. It eliminates the need for a separate float switch, a common source of failures or blockages in bilge environments. Self-priming and the ability to run dry without damage, combined with debris management without a filter, drastically reduce maintenance requirements. Professionals will appreciate the multi-directional orientation of the discharge port, which facilitates integration into various plumbing configurations, and the pre-wired waterproof connectors that protect against electrolysis and capillary damage.

It is important to note that, while robust, this system is specifically designed for bilge water and must not be used for flammable liquids, diesel, or chemicals. Additionally, for installations below the waterline, a vented anti-siphon loop is mandatory to prevent any risk of siphoning. Mounting the pump body on a bulkhead or additional board rather than directly on the hull is a key recommendation for a durable installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Whale Bilge IC 12V Automatic Bilge System

641,75€

641,75€ ~~709,34€~~

Frequently Asked Questions

Need help? Contact us

How can I check the compatibility of the Whale Bilge IC SI8284 system with my installation?

Before ordering and installing the Bilge IC SI8284 automatic bilge system, it is recommended to verify the exact reference and compatibility with the equipment already installed on your boat.

What type of sailboat is this keel system suitable for?

This system is suitable for recreational marine vessels. It is designed to be used as a primary bilge pump for boats up to 12 meters (39.4 feet) in length.

What is the Whale SI8284 Bilge IC automatic bilge pump system - 12 V?

The Whale SI8284 is an automatic bilge pump from the Bilge IC range, designed for electric bilge drainage in marine vessels. It operates on 12 V DC.

What is the installation type for the Whale Bilge IC SI8284 system?

The Whale Bilge IC SI8284 system is a remote-mounted bilge kit (Retail Bilge IC - Remote Mounted Bilge Kit). It is designed to be installed as a remote-mounted bilge pump in recreational marine vessels.

What is the required supply voltage for the Bilge IC SI8284 bilge system?

The Bilge IC automatic bilge pump system, part number SI8284, is designed to operate on a 12 V direct current (d.c.) power supply.

Which Whale product range does this bilge system belong to?

The Bilge IC automatic bilge pump system - 12 V, part number SI8284, belongs to the Whale Bilge IC product line.

What is the Bilge IC Whale SI8284 automatic bilge system and what is it used for?

The Bilge IC Whale SI8284 automatic bilge system is a high-capacity remote-mount bilge pump with integrated smart control. It is designed for automatic electrical bilge drainage in recreational vessels. This pre-wired system consolidates four distinct components into one, simplifying installation and operation.

What are the main components included in the Bilge IC SI8284 system?

The Bilge IC SI8284 system includes the following components:

One Gulper® IC bilge pump.One IC Strainer strainer.Three #8 self-tapping screws and washers.A set of inline fuses.

What are the pumping capacities of the Bilge IC SI8284 system in 12 V?

Pumping capacities vary depending on installation and operating conditions:

With a suction head of 0m, discharge head of 1m, and a 19mm (¾") hose: 19 litres/minute (1140 litres/hour) with a current draw of 7.5 amps.
With a suction head of 0m, discharge head of 1m, and a 25mm (1") hose: 17.5 litres/minute (1050 litres/hour) with a current draw of 8 amps.
With a suction head of 1m, discharge head of 1m, and a 19mm (¾") hose: 17.5 litres/minute (1038 litres/hour) with a current draw of 7.5 amps.
With a suction head of 1m, discharge head of 1m, and a 25mm (1") hose: 15.5 litres/minute (930 litres/hour) with a current draw of 8 amps.

What is the operating voltage range for the Bilge IC 12 V system?

The Bilge IC 12 V system is designed to operate within a DC voltage range of 10 V to 13.6 V DC.

Which materials are used to manufacture the Gulper IC pump?

The manufacturing materials for the Gulper IC pump are as follows:

The pump head is made of glass-reinforced nylon. The valves and diaphragm are made of Santoprene®. The pump body is made of aluminum. The gear is made of Delrin®. The fasteners are made of stainless steel.

How does the Intelligent Control (IC) technology integrated into the system work?

At the core of every Whale® IC product is an innovative electronic control circuit. This technology enables IC sensor accessories, such as the IC Strainer, to communicate directly with IC pumps to control their performance. The accessories send signals to the integrated smart software, which then commands the pumps to react as needed, ensuring fully automatic operation.

Can the Bilge IC SI8284 system be used to pump liquids other than bilge water?

No, the Bilge IC SI8284 system is specifically designed to pump bilge water only. It is not suitable for pumping flammable liquids, diesel, chemicals, or for domestic applications. Its use is limited to recreational vessels and bilge water.

Where should I install the Bilge IC automatic bilge system?

Choose a dry location, away from stagnant water and free of obstacles. Mount the system in a position that allows for the shortest possible hose lengths. The Gulper® IC pump can be mounted on a horizontal or vertical surface. If mounted vertically, ensure the pump head is positioned below the motor body.

What are the mounting surface requirements for the Gulper IC pump?

The pump must be mounted on a bulkhead or an additional board with a minimum thickness of 19 mm (¾") to ensure secure fastening with the supplied screws. Do not screw the pump directly onto the boat hull.

Which types of pipe fittings are compatible with the Bilge IC system?

The Gulper® IC pump is compatible with 19 mm (¾") or 25 mm (1") barbed fittings. The Strainer IC strainer is equipped with a 19 mm (¾") port. It is recommended to use a smooth-bore reinforced hose and secure it with hose clamps.

What is the minimum wire gauge and recommended fuse for wiring the Bilge IC 12 V system?

The minimum recommended wire gauge is 1.5 mm² (16 AWG). For electrical protection, a 10-ampere automotive fuse is recommended.

For which type of vessel is the Bilge IC SI8284 system suitable?

The Bilge IC SI8284 system is designed to be installed in recreational vessels only. It can serve as the primary bilge pump for boats up to 12 meters (39.4 feet) in length, in accordance with ISO15083, or as a secondary bilge pump on any other vessel.

Are there service kits or optional accessories available for the Bilge IC SI8284 system?

Yes, optional accessories are available. This includes the AK2050 service kit for replacing the pump head on all Gulper® pumps, as well as the 6 m (18 ft) Deutsch® connector extension cable AK2086B.

Is the Bilge IC Whale SI8284 automatic bilge pump system covered by a warranty?

Yes, the Bilge IC Whale SI8284 automatic bilge pump system is covered by the manufacturer’s warranty. For details on warranty terms and conditions, refer to the warranty statement provided with the product.