Smart Battery Protect 12/24V-220A - Victron Energy

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Spara 20%

Victron Energy

BPR122022000

Smart Battery Protect 12/24V-220A

The Smart Battery Protect 12/24V-220A from VICTRON ENERGY (BPR122022000) effectively protects 12V or 24V batteries against excessive discharge and overvoltage. With a continuous capacity of 220A, it is easily programmable via Bluetooth and features a dedicated mode for lithium-ion batteries for optimal integration with a VE.Bus BMS. It is part of the Smart BatteryProtect range, which is more advanced than the previous classic BatteryProtect series, and includes a connector with a pre-assembled negative DC cable.

Retail priceGet pro pricing

108,28€

108,28€ ~~135,60€~~

með skatti Sendingar reiknaðar við greiðslu.

Á lager

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Technical specifications

Nafn mobilapps	VictronConnect
Default Disengage Voltage 12v	10.5
Default Disengage Voltage 24v	21
Default Engage Voltage 12v	12
Max Continuous Load Current A Detail	220
Over Voltage Protection Threshold 12v	16.3
Over Voltage Protection Threshold 24v	32.6
Hámarkstraumur (A)	600
Peak Current Duration S	30
Power Consumption Ble Active Device On Ma	1.4
Power Consumption Ble Active Device Shutdown Ma	0.9
Power Consumption Ble Disabled Device On Ma	1.2
Power Consumption Ble Disabled Device Shutdown Ma	0.7
Preset Levels Count	9
Fullt nafn vörunnar	[VICTRON ENERGY] Smart Battery Protect 12/24V-220A
Gerð	Coupe-circuit intelligent
Programming Method	Application VictronConnect (Bluetooth), broche de programmation
Switch Technology	MOSFET
Þráðlaus tenging	Bluetooth

Detailed description

Hannaður til að vernda rafkerfi sjávar og farartækja, Smart Battery Protect 12/24V-220A frá VICTRON ENERGY (vörunúmer BPR122022000) er gáfaður straumrofi. Hann verndar rafhlöður gegn ofurlosun, sem fyrirbyggir mögulegar skemmdir og tryggir nægilegt afl fyrir vélarstarter. Þessi gerð skilst frá venjulegum BatteryProtect-vörum með innbyggðri Bluetooth-tengingu sem gerir einfaldlega mögulegt að stilla inn og út tengingar með VictronConnect-forritinu auk níu fyrirfram stilltra stiga sem eru aðgengileg með forritunarstiftum.

Virknivið og tæknilegir eiginleikar

Smart BatteryProtect 12/24V-220A skynjar sjálfkrafa spennu kerfisins (12V eða 24V) við fyrsta tengingu. Hann býður upp á hámarks straumhlöðunargetu upp á 220A, með toppstraum upp á 600A í 30 sekúndur, sem gerir hann öflugasta lausnina í Smart BatteryProtect-seríunni, fram yfir 65A og 100A gerðirnar. Spennuviðtakasvið er frá 6V upp í 35V. Orkuþörf er sérlega lág, með 1,4 mA þegar Bluetooth er virkt og 0,9 mA við lágspennuvarúm, sem er mikilvægt fyrir uppsetningar með lithium-rafhlöður.

Framföruleg vernd og kerfisinnlimun

Þessi tæki hefur innbyggða vernd gegn ofurspennu, sem rýfur tengingu ef spenna DC fer yfir 16,3V (fyrir 12V kerfi) eða 32,6V (fyrir 24V kerfi), og verndar þannig viðkvæmt tækjabúnað. Með notkun MOSFET-gegnum í stað relóa er hann ónæmur fyrir neistum. Viðvarunarúttak er virkjað eftir 12 sekúndur ef spenna rafhlöðu fellur undir losunarþröskuldinn, sem fyrirbyggir falskar viðvaranir vegna vélarstarter. Tenging við rafhlöðu er rofin eftir 90 sekúndur, með endurtengingu eftir 30 sekúndur ef spenna hækkar aftur. Smart BatteryProtect getur verið stilltur fyrir lithium-rafhlöður og stjórnaður með ytri VE.Bus BMS, og starfar sem straumrofi milli rafhlöðuhleðslutækis og lithium-rafhlöðu. Rafmagnskerfið er varið með IP67 (steypt í resin), en tengingar eru IP00. Hann fylgir með tengi með fyrirtengdum neikvæðum DC rafleiðara.

Expert review

Pol CONIN

Stjórnandi stafrænna hluta

« Smart 220A protection for marine and mobile batteries »

The Smart Battery Protect 12/24V-220A from VICTRON ENERGY is a strategic solution for extending battery bank life in marine applications. Its primary function is to prevent deep discharge, a major factor in battery degradation, whether they are lead-acid or lithium-based. For systems integrating lithium-ion batteries, the specific mode controlled by a VE.Bus BMS is a clear advantage, enabling fine and responsive management of charge disconnection, often faster than standard voltage thresholds.

Installing this BatteryProtect requires careful attention to its positioning, ideally within 50 cm of the battery, and to cable sizing to avoid harmful voltage drops. It is critical to note that this device is unidirectional (IN to OUT) and must never be used to directly disconnect high-capacitance loads such as inverters or inverter/chargers on their DC input. In these cases, it is mandatory to control the remote on/off command of this equipment via the BatteryProtect. Bluetooth programming greatly simplifies threshold configuration, offering superior flexibility compared to BatteryProtect models without smart connectivity. With its 220A capacity, this model suits medium to high-power systems where 65A or 100A versions would be undersized.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Smart Battery Protect 12/24V-220A

108,28€

108,28€ ~~135,60€~~

Complete your installation with

Complementary equipment

Victron Energy

Rafmagnsgeymir Lithium 12,8V/330Ah Smart

Ref : BAT512132410

1.633,00€

1.633,00€ ~~2.118,00€~~

Victron Energy

Lítíumrafhlöðun Smart 25,6V/100Ah-a (2,56 kWh) NG

Ref : BAT524110620

1.224,00€

1.224,00€ ~~1.693,20€~~

Victron Energy

Smart BMS CL 12-100

Ref : BMS110022000

157,61€

157,61€ ~~193,20€~~

Victron Energy

Lynx Smart BMS 500 (M8)

Ref : LYN034160200

871,43€

871,43€ ~~1.161,60€~~

Victron Energy

Hleðslutæki fyrir rafhlöður Blue Smart IP65 12V 25A CEE 7/16

Ref : BPC122531034

191,81€

191,81€ ~~246,00€~~

Victron Energy

Blue Smart IP65 24V 13A

Ref : BPC241331064

188,64€

188,64€ ~~246,00€~~

Victron Energy

Miðstöð samskipta Cerbo GX

Ref : BPP900450100

276,00€

276,00€ ~~370,80€~~

Victron Energy

GX Touch 50

Ref : BPP900455050

202,37€

202,37€ ~~282,00€~~

Victron Energy

Stjórnandi hleðslu SmartSolar MPPT 100/30

Ref : SCC110030210

117,17€

117,17€ ~~164,40€~~

Frequently asked questions

Need help? Contact us

What is the Smart Battery Protect 12/24V-220A and what is it used for?

The Victron Energy Smart Battery Protect 12/24V-220A is an intelligent circuit breaker designed to protect batteries from excessive discharge. It disconnects non-essential loads before the battery is fully depleted, preventing potential battery damage and ensuring enough power remains to start the engine. It can also be used as an on/off switch for the entire system.

What is the difference between the Smart Battery Protect and a standard Battery Protect?

The main difference is the integrated Bluetooth connectivity of the Smart Battery Protect. This feature allows for very easy programming of the turn-on and turn-off levels via the VictronConnect app on a smartphone or tablet. Standard Battery Protect models, on the other hand, are programmed via a PROG pin to GND and use a 7-segment LED display to indicate the selected setting.

What is the maximum continuous DC current that this Smart Battery Protect can handle?

The Smart Battery Protect 12/24V-220A can handle a maximum continuous charging current of 220 amperes. This is the most powerful model in the Smart Battery Protect series.

What is the peak current capacity that the Smart Battery Protect can handle?

This Smart Battery Protect can handle a peak current of up to 600 amperes for a maximum duration of 30 seconds.

What is the operating voltage range of this device?

The Smart Battery Protect 12/24V-220A operates within a voltage range from 6V to 35V DC.

How does the Smart Battery Protect protect against overvoltage?

To protect sensitive loads, the Smart Battery Protect automatically disconnects the load if the continuous voltage exceeds 16.3V for a 12V system, or 32.6V for a 24V system.

Is this device spark-resistant?

Yes, the Smart Battery Protect is spark-resistant. It uses MOSFET transistors instead of relays, which eliminates sparking during switching.

What are the default voltage thresholds for disconnecting and reconnecting the charge?

The default thresholds for disconnecting the charge are 10.5V for a 12V system or 21V for a 24V system. The default thresholds for reconnecting the charge are 12V for a 12V system or 24V for a 24V system.

What is the purpose of the delayed alarm output?

The alarm output is triggered if the battery voltage drops below the pre-set disconnect level for more than 12 seconds. This delay prevents false alarms, for example during engine start-up. The alarm output is an open-collector output protected against short circuits, connected to the negative rail, with a maximum current of 50 mA. It is typically used to activate a buzzer, LED indicator, or relay.

What are the dimensions and weight of the Smart Battery Protect 12/24V-220A?

The Smart Battery Protect 12/24V-220A has dimensions of 62 x 123 x 120 mm (height x width x depth) and weighs 0.8 kg.

What is the IP protection rating of this product?

The Smart Battery Protect electronics are rated IP67 (potted), meaning they are protected against temporary immersion in water. The connections, however, are rated IP00, meaning they are not protected against water or foreign objects and require adequate protection during installation.

Where should I install the Smart Battery Protect?

It is recommended to install the Smart Battery Protect in a well-ventilated area, preferably near the battery (within a maximum distance of 50 cm). However, it must not be installed directly above the battery due to possible corrosive gases. It is also important to choose an appropriate cable size and length to match the load.

How does the Smart Battery Protect detect the system voltage (12V or 24V)?

The Smart Battery Protect automatically detects the system voltage (12V or 24V) only once during the first power-up. The selected voltage is then stored, and subsequent automatic detection is disabled. If you reuse the device in an installation with a different voltage, you can reset this detection via the programming pin or the VictronConnect application.

Should a fuse be installed with the Smart Battery Protect?

Yes, an appropriately sized fuse must be inserted in the cable between the battery and the Smart Battery Protect, in accordance with local regulations. Additionally, the ground cable (GND) must be protected, a 300 mA fuse being sufficient.

How to connect a remote on/off switch?

A remote on/off switch can be connected between the two pins of the 2-pin remote terminal. Alternatively, the terminal labeled REMOTE can be pulled high (connected to the battery positive) to turn the device on, or left floating to turn it off.

Can inverters or chargers be connected directly to the DC inputs of the Smart Battery Protect?

No, it is strictly forbidden to connect inverters or inverter/chargers directly to the DC inputs of the Smart Battery Protect. Reverse current could flow and damage the device. If you wish to control an inverter or inverter/charger via the Smart Battery Protect, you must use the remote control port of the inverter or inverter/charger.

Is the Smart Battery Protect compatible with lithium-ion batteries?

Yes, the Smart Battery Protect is compatible with lithium-ion batteries. It features a special configuration mode that allows it to be controlled via an external battery management system (BMS), such as Victron Energy's VE.Bus BMS. In this mode, the BMS can directly command load disconnection when required.

How to program the Smart Battery Protect's turn-on/turn-off levels?

The Smart Battery Protect's turn-on and turn-off levels can be programmed very simply via the VictronConnect app using its integrated Bluetooth connectivity. You can configure any desired level. Alternatively, you can set one of the nine predefined levels using the programming pin (PROG pin).

Can the Smart Battery Protect be used to control a battery charger?

Yes, the Smart Battery Protect can be used as a charge switch between a battery charger and a lithium-ion battery. However, it is important to note that the BatteryProtect is a unidirectional device and is not designed for reverse currents from charging sources. The unit must be oriented so that current flows in the intended direction, from the input (IN) to the output (OUT).

Can I connect an inverter or a battery charger/inverter directly to the Smart Battery Protect?

No, it is strictly forbidden to connect inverters or battery charger/inverters directly to the Smart Battery Protect's DC inputs.

The Smart Battery Protect is a unidirectional device, designed to manage current in only one direction at a time (either to a load or from a charger). Current can only flow from the IN terminal to the OUT terminal. A direct connection with an inverter or a battery charger/inverter could result in reverse current and damage the device.

If you want to control an inverter or a battery charger/inverter using the Smart Battery Protect, you must use the Battery Protect to control the inverter or battery charger/inverter via its remote control port.