Savienojuma stienis vidējais 35,5 līdz 42,5 mm 650 A sprūžu turētājam 8 līdz 10 mm

The BEP 779-LB-2-B tie bar is an electrical component designed to optimize connections in marine installations. It enables the creation of robust and organized links between fuse holders or other compatible electrical elements, forming part of BEP's Pro Installer system.

This link bar is made with tinned copper conductors CDA102, known for their conductivity and corrosion resistance. The base is in reinforced fiber, resistant to high temperatures, and the studs, washers, and nuts are in stainless steel to prevent seizing and improve longevity.

The BEP 779-LB-2-B busbar is rated for continuous current up to 650 amperes (650A).

It is designed to operate under a maximum voltage of 50V DC.

Yes, it is fitted with transparent protective covers. These covers have removable side skirts, providing three-sided insulation and flexibility for cable entry.

Yes, its design is part of the BEP Pro Installer modular system, ensuring a common interconnection height for easy integration with other BEP products in the same range.

Yes, it is designed for durability in a marine environment. The tinned copper conductors (CDA102) and the studs, washers, and nuts in stainless steel contribute to its high corrosion resistance.

The primary function of this busbar is to provide a structured and robust solution for interconnecting electrical components, such as fuse holders, in high-power circuits, offering an organized alternative to conventional jumper cables.

This busbar is specifically designed to accept studs with a diameter of 8 to 10 mm.

Yes, it is suitable for 12V, 24V, and 48V systems, as it can handle a continuous current of 650A at a maximum voltage of 50V DC, making it compatible with these common voltages.

It is designed to integrate with the BEP Pro Installer system, ensuring a common interconnection height with other products in this range. It is specifically sized to connect fuse holders or other compatible electrical components.

This busbar is specifically sized to connect components with a spacing of 35.5 to 42.5 mm.

Yes, it provides a structured and robust solution for high-power circuits, serving as an alternative to conventional wiring while improving connection organization and reliability.

The transparent protective covers feature removable side skirts. This design allows flexibility for cable entry from various angles while ensuring effective isolation on three sides.

Yes, the interconnecting bar is designed to connect components with a precise spacing of 35.5 to 42.5 mm. It is essential to ensure that the components to be connected comply with this spacing range for correct and secure installation.

Yes, thanks to its modular design and common interconnection height with other BEP Pro Installer products, it is designed for easy and orderly integration into existing electrical panels or systems.

Stainless steel is used for studs, washers, and nuts to prevent seizing. It is recommended to use appropriate tools and tighten to the manufacturer's specified torque to ensure a secure and durable electrical connection without damaging components.

The busbar is supplied with transparent protective covers that provide insulation on three sides. It is crucial to ensure these covers are correctly installed and closed after all connections are made to guarantee optimal insulation and the safety of the installation.

No, the link bar is designed for a specific spacing of 35.5 to 42.5 mm and must not be cut or modified. Any alteration could compromise its structural integrity, current capacity, safety, and void any compliance.

Yes, the tie bar base is made of fiber-reinforced material, a material known for its high temperature resistance, making it suitable for environments where heat can be a factor.