SCI cable 1m to adapt to RJ45 push buttons

This is a CZone-branded cable, 1 meter long, designed to integrate pushbuttons with an RJ45 connection into a CZone digital switching system. It is used to connect these pushbuttons to CZone switching control interfaces (SCI) or digital switching junction boxes (DSB).

This CZone SCI cable is 1 meter long.

The cable has an RJ45 connection at one end, intended for push buttons, and a 5-pin connector at the other end, optimized for connection to CZone SCI or DSB modules.

The part number (SKU) of this cable is 80-911-0086-01.

Yes, this cable is a CZone product, part of the Navico Group ecosystem.

Its primary function is to enable the connection and integration of push buttons with RJ45 interface to CZone digital switching systems, thus facilitating automated control of circuits on board boats, recreational vehicles, and other specialized vehicles.

Yes, CZone systems, for which this cable is designed, are specifically developed for marine applications, recreational vehicles, and specialized vehicles, ensuring construction suitable for these environments.

Cable 80-911-0086-01 is specifically designed for pushbuttons with RJ45 interface. Cable 80-911-0019-00 is intended for SCI rocker switches.

This cable is compatible with pushbuttons that use an RJ45 connection for their interface with the CZone system.

This cable is specifically designed for use with CZone switching control interfaces (SCI) and CZone digital switching junction boxes (DSB) that have the corresponding 5-pin input.

No, this cable is specifically designed to operate within the CZone ecosystem, which is NMEA 2000 certified. It is not intended for use with non-CZone systems or non-NMEA 2000 equipment directly.

No, this cable is specifically optimized for push buttons. For SCI rocker switches, another cable (reference 80-911-0019-00) is usually required.

Yes, by connecting the pushbuttons to a CZone SCI or DSB module via this cable, the pushbutton information is integrated into the CZone network, which is itself NMEA 2000 certified. This enables seamless communication within an NMEA 2000 network.

The cable connects to the pushbuttons via its RJ45 connector. Simply plug the cable's RJ45 connector into the RJ45 port of the compatible pushbutton panel.

The other end of the cable, fitted with a 5-pin connector, plugs directly into the corresponding input of a CZone switching control interface (SCI) or a CZone digital switching distribution box (DSB).

Installing this cable is generally straightforward and does not require special tools, as it is a plug-and-play connection. However, a basic understanding of CZone and NMEA 2000 systems is useful for overall system configuration.

It is generally recommended to use cables of the appropriate length from the start to ensure signal integrity and system reliability for CZone. Adding non-specific extensions could affect performance. It is preferable to choose a CZone cable of the desired length if 1 meter is insufficient.

CZone connectors are generally designed to be plugged in only one correct orientation, thanks to keyed connectors. Ensure the connector is properly aligned before inserting it to avoid damaging the pins.

Yes, this CZone cable is a new product and is covered by the manufacturer's standard warranty, ensuring its quality and proper operation.

The CZone SCI 1-meter cable (reference 80-911-0086-01) is specifically designed to connect push buttons to CZone systems.

It provides the link between push buttons and CZone switching control interfaces (SCI) or CZone digital switching junction boxes (DSB). This cable features an RJ45 connector on one end and a 5-pin connector on the other, optimized for this application. It is important to note that it is dedicated to push buttons and differs from cables used for SCI rocker switches.